This is to improve the mp886x regulator driver support. patch1 implments .set_ramp_delay patch2 and patch3 support the switch freq setting patch4 converts dt binding to json-schema Since v2: - Use mps,switch-frequency-hz instead of mps,switch-frequency - Add "maxItems: 2" to "mps,fb-voltage-divider" in dt-binding - Add a $ref to regulator.yaml in dt-binding Since v1: - put any schema conversions at the end of the series as Mark suggested. Jisheng Zhang (4): regulator: mp886x: implement set_ramp_delay dt-bindings: regulator: mp886x: support mps,switch-frequency-hz regulator: mp886x: support setting switch freq dt-bindings: regulator: Convert mp886x to json-schema .../devicetree/bindings/regulator/mp886x.txt | 27 ----- .../bindings/regulator/mps,mp886x.yaml | 61 ++++++++++ drivers/regulator/mp886x.c | 109 +++++++++++++++++- 3 files changed, 167 insertions(+), 30 deletions(-) delete mode 100644 Documentation/devicetree/bindings/regulator/mp886x.txt create mode 100644 Documentation/devicetree/bindings/regulator/mps,mp886x.yaml -- 2.28.0
