The panel uses a Focaltech FT8006p, the touch part is handled by the already existing edt-ft5x06. It can be found in e.g. the Librem 5. Changes from v1: - Due to review comments by Sam Ravnborg, thanks! https://lore.kernel.org/dri-devel/20200815083917.GA993113@xxxxxxxxxxxx/ - Don't preserve newlines with '|' in description - Use reset-gpios and backlight from panel-common.yaml - Reindent example https://lore.kernel.org/dri-devel/20200815093226.GB993113@xxxxxxxxxxxx/ - Drop unused includes - Use dev_* instead of DRM_* for printing - Turn off regulators in reverse order from enable - Silence errors in mantix_{shutdown,remove} - Drop duplicate mipi_dsi_dcs_enter_sleep_mode() https://lore.kernel.org/dri-devel/20200815100230.GA1002374@xxxxxxxxxxxx/ - Use dev_err_probe() - Add delays when turning off panel as suggested by the data sheet This series is against next-20200814. Guido Günther (3): dt-bindings: vendor-prefixes: Add mantix vendor prefix dt-bindings: Add Mantix MLAF057WE51-X panel bindings drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel .../display/panel/mantix,mlaf057we51-x.yaml | 70 ++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 7 + drivers/gpu/drm/panel/Kconfig | 11 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-mantix-mlaf057we51.c | 328 ++++++++++++++++++ 6 files changed, 419 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml create mode 100644 drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c -- 2.26.2
