RE: [PATCH] ARM: dts: iwg22d-sodimm: Fix dt nodes sorting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

Thanks for the feedback.


> Subject: Re: [PATCH] ARM: dts: iwg22d-sodimm: Fix dt nodes sorting
>
> Hi Biju,
>
> On Wed, Jul 29, 2020 at 2:26 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> wrote:
> > Some device nodes in the r8a7745-iwg22d-sodimm.dts are not sorted
> > alphabetically. This patch fixes the sorting of nodes and also fixes a
> > typo in the stmpe node.
> >
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
>
> Thanks for your patch!
>
> > --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
> > +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
> > @@ -53,6 +53,25 @@
> >                 clock-frequency = <26000000>;
> >         };
> >
> > +       backlight_lcd: backlight {
> > +               compatible = "pwm-backlight";
> > +               pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>;
> > +               brightness-levels = <0 4 8 16 32 64 128 255>;
> > +               default-brightness-level = <7>;
> > +       };
> > +
> > +       lcd_panel: lcd {
> > +               compatible = "edt,etm043080dh6gp";
> > +               power-supply = <&vccq_panel>;
> > +               backlight = <&backlight_lcd>;
> > +
> > +               port {
> > +                       lcd_in: endpoint {
> > +                               remote-endpoint = <&du_out_rgb0>;
> > +                       };
> > +               };
> > +       };
> > +
> >         rsnd_sgtl5000: sound {
>
> Shouldn't the sound node be moved below the regulator nodes?

Yes I agree. sorting should be as per node names, not based on the labels. I will send V2.

Regards,
Biju

> >                 compatible = "simple-audio-card";
> >                 simple-audio-card,format = "i2s"; @@ -68,18 +87,6 @@
> >                 };
> >         };
> >
> > -       vccq_sdhi0: regulator-vccq-sdhi0 {
> > -               compatible = "regulator-gpio";
> > -
> > -               regulator-name = "SDHI0 VccQ";
> > -               regulator-min-microvolt = <1800000>;
> > -               regulator-max-microvolt = <3300000>;
> > -
> > -               gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
> > -               gpios-states = <1>;
> > -               states = <3300000 1>, <1800000 0>;
> > -       };
> > -
> >         vccq_panel: regulator-vccq-panel {
> >                 compatible = "regulator-fixed";
> >                 regulator-name = "Panel VccQ";
>
> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-
> m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds


Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux