Convert the i.MX7ULP PM binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
.../bindings/arm/freescale/fsl,imx7ulp-pm.txt | 23 -------------
.../bindings/arm/freescale/fsl,imx7ulp-pm.yaml | 40 ++++++++++++++++++++++
2 files changed, 40 insertions(+), 23 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt
create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt
deleted file mode 100644
index 75195be..0000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Freescale i.MX7ULP Power Management Components
-----------------------------------------------
-
-The Multi-System Mode Controller (MSMC) is responsible for sequencing
-the MCU into and out of all stop and run power modes. Specifically, it
-monitors events to trigger transitions between power modes while
-controlling the power, clocks, and memories of the MCU to achieve the
-power consumption and functionality of that mode.
-
-The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or
-Standby modes for either Cortex family. Run, Wait, and Stop are the
-common terms used for the primary operating modes of Kinetis
-microcontrollers.
-
-Required properties:
-- compatible: Should be "fsl,imx7ulp-smc1".
-- reg: Specifies base physical address and size of the register sets.
-
-Example:
-smc1: smc1@40410000 {
- compatible = "fsl,imx7ulp-smc1";
- reg = <0x40410000 0x1000>;
-};
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
new file mode 100644
index 0000000..1b00294
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-pm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP Power Management Components
+
+maintainers:
+ - A.s. Dong <aisheng.dong@xxxxxxx>
+
+description: |
+ The Multi-System Mode Controller (MSMC) is responsible for sequencing
+ the MCU into and out of all stop and run power modes. Specifically, it
+ monitors events to trigger transitions between power modes while
+ controlling the power, clocks, and memories of the MCU to achieve the
+ power consumption and functionality of that mode.
+
+ The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or
+ Standby modes for either Cortex family. Run, Wait, and Stop are the
+ common terms used for the primary operating modes of Kinetis
+ microcontrollers.
+
+properties:
+ compatible:
+ const: fsl,imx7ulp-smc1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ smc1@40410000 {
+ compatible = "fsl,imx7ulp-smc1";
+ reg = <0x40410000 0x1000>;
+ };
--
2.7.4
