This patch adds the bindings for the Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS) present on various TI SoCs. The IP is present on multiple TI SoC architecture families including the OMAP architecture SoCs such as AM33xx, AM437x and AM57xx; and on a Keystone 2 architecture based 66AK2G SoC. It is also present on the Davinci based OMAPL138 SoCs and K3 architecture based AM65x and J721E SoCs as well. The IP has a number of sub-modules some of which are represented as their own devices. This binding covers only the top-level sub-system devices, and some sub-modules like MDIO, MII_RT (Ethernet MII_RT module with MII ports) and IEP (Industrial Ethernet Peripheral). The remaining sub-modules bindings shall be defined in the respective driver subsystem bindings folders. Couple of full examples have also been added demonstrating the devices on AM335x and AM437x SoCs. Signed-off-by: Suman Anna <s-anna@xxxxxx> Signed-off-by: Roger Quadros <rogerq@xxxxxx> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx> Reviewed-by: Lee Jones <lee.jones@xxxxxxxxxx> --- .../devicetree/bindings/soc/ti/ti,pruss.yaml | 383 +++++++++++++++++++++ 1 file changed, 383 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml new file mode 100644 index 0000000..4b7a098 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -0,0 +1,383 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/ti,pruss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: |+ + TI Programmable Real-Time Unit and Industrial Communication Subsystem + +maintainers: + - Suman Anna <s-anna@xxxxxx> + +description: |+ + + The Programmable Real-Time Unit and Industrial Communication Subsystem + (PRU-ICSS a.k.a. PRUSS) is present on various TI SoCs such as AM335x, AM437x, + Keystone 66AK2G, OMAP-L138/DA850 etc. A PRUSS consists of dual 32-bit RISC + cores (Programmable Real-Time Units, or PRUs), shared RAM, data and + instruction RAMs, some internal peripheral modules to facilitate industrial + communication, and an interrupt controller. + + The programmable nature of the PRUs provide flexibility to implement custom + peripheral interfaces, fast real-time responses, or specialized data handling. + The common peripheral modules include the following, + - an Ethernet MII_RT module with two MII ports + - an MDIO port to control external Ethernet PHYs + - an Industrial Ethernet Peripheral (IEP) to manage/generate Industrial + Ethernet functions + - an Enhanced Capture Module (eCAP) + - an Industrial Ethernet Timer with 7/9 capture and 16 compare events + - a 16550-compatible UART to support PROFIBUS + - Enhanced GPIO with async capture and serial support + + A PRU-ICSS subsystem can have up to three shared data memories. A PRU core + acts on a primary Data RAM (there are usually 2 Data RAMs) at its address + 0x0, but also has access to a secondary Data RAM (primary to the other PRU + core) at its address 0x2000. A shared Data RAM, if present, can be accessed + by both the PRU cores. The Interrupt Controller (INTC) and a CFG module are + common to both the PRU cores. Each PRU core also has a private instruction + RAM, and specific register spaces for Control and Debug functionalities. + + Various sub-modules within a PRU-ICSS subsystem are represented as individual + nodes and are defined using a parent-child hierarchy depending on their + integration within the IP and the SoC. These nodes are described in the + following sections. + + + PRU-ICSS Node + ============== + Each PRU-ICSS instance is represented as its own node with the individual PRU + processor cores, the memories node, an INTC node and an MDIO node represented + as child nodes within this PRUSS node. This node shall be a child of the + corresponding interconnect bus nodes or target-module nodes. + + See ../../mfd/syscon.yaml for generic SysCon binding details. + + +properties: + compatible: + enum: + - ti,am3356-pruss # for AM335x SoC family + - ti,am4376-pruss0 # for AM437x SoC family and PRUSS unit 0 + - ti,am4376-pruss1 # for AM437x SoC family and PRUSS unit 1 + - ti,am5728-pruss # for AM57xx SoC family + - ti,k2g-pruss # for 66AK2G SoC family + - ti,am654-icssg # for K3 AM65x SoC family + - ti,j721e-icssg # for K3 J721E SoC family + + reg: + maxItems: 1 + + ranges: + maxItems: 1 + description: | + Standard ranges definition using addresses from 0 for child nodes. + + power-domains: + description: | + This property is as per sci-pm-domain.txt. + + memories: + description: | + The various Data RAMs within a single PRU-ICSS unit are represented as a + single node with the name 'memories'. + + type: object + + properties: + reg: + minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM. + maxItems: 3 + items: + - description: Address and size of the Data RAM0. + - description: Address and size of the Data RAM1. + - description: | + Address and size of the Shared Data RAM. Note that on AM437x one + of two PRUSS units don't contain Shared RAM, while the second one + has it. + + reg-names: + minItems: 2 + maxItems: 3 + items: + - const: dram0 + - const: dram1 + - const: shrdram2 + + required: + - reg + - reg-names + + cfg: + description: | + PRU-ICSS configuration space. CFG sub-module represented as a SysCon. + + type: object + + properties: + compatible: + items: + - const: ti,pruss-cfg + - const: syscon + + reg: + maxItems: 1 + + iep: + description: | + Industrial Ethernet Peripheral to manage/generate Industrial Ethernet + functions such as time stamping. Each PRUSS has either 1 IEP (on AM335x, + AM437x, AM57xx & 66AK2G SoCs) or 2 IEPs (on K3 AM65x & J721E SoCs ). IEP + is used for creating PTP clocks and generating PPS signals. The bindings + for this shall be defined in ../../net/ti,icss-iep.yaml. + + type: object + + mii-rt: + description: | + Real-Time Ethernet to support multiple industrial communication protocols. + MII-RT sub-module represented as a SysCon. + + type: object + + properties: + compatible: + items: + - const: ti,pruss-mii + - const: syscon + + reg: + maxItems: 1 + + mii-g-rt: + description: | + The Real-time Media Independent Interface to support multiple industrial + communication protocols (G stands for Gigabit). MII-G-RT sub-module + represented as a SysCon. + + type: object + + properties: + compatible: + items: + - const: ti,pruss-mii-g + - const: syscon + + reg: + maxItems: 1 + + interrupt-controller: + description: | + PRUSS INTC Node. Each PRUSS has a single interrupt controller instance + that is common to all the PRU cores. This should be represented as an + interrupt-controller node. The bindings for this shall be defined in + ../../interrupt-controller/ti,pruss-intc.yaml. + + type: object + + mdio: + description: | + MDIO Node. Each PRUSS has an MDIO module that can be used to control + external PHYs. The MDIO module used within the PRU-ICSS is an instance of + the MDIO Controller used in TI Davinci SoCs. + + allOf: + - $ref: /schemas/net/ti,davinci-mdio.yaml# + + type: object + +patternProperties: + "^(pru|rtu|txpru)@[0-9a-f]+$": + description: | + PRU Node. Each PRUSS has dual PRU cores, each represented as a RemoteProc + device through a PRU child node each. Each node can optionally be rendered + inactive by using the standard DT string property, "status". The ICSSG IP + present on K3 SoCs have additional auxiliary PRU cores with slightly + different IP integration. The bindings for this shall be defined in + ../../remoteproc/ti,pru-rproc.yaml + + type: object + +required: + - compatible + - reg + - ranges + +# Due to inability of correctly verifying sub-nodes with an @address through +# the "required" list, the required sub-nodes below are commented out for now. + +#required: +# - memories +# - interrupt-controller +# - pru + +if: + properties: + compatible: + contains: + enum: + - ti,k2g-pruss + - ti,am654-icssg + - ti,j721e-icssg +then: + required: + - power-domains + +examples: + - | + + /* Example 1 AM33xx PRU-ICSS */ + pruss: pruss@0 { + compatible = "ti,am3356-pruss"; + reg = <0x0 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pruss_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x3000>; + reg-names = "dram0", "dram1", "shrdram2"; + }; + + pruss_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + reg = <0x26000 0x2000>; + }; + + pruss_iep: iep@2e000 { + compatible = "ti,am3356-icss-iep"; + reg = <0x2e000 0x31c>; + clocks = <&pruss_iepclk_mux>; + }; + + pruss_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x58>; + }; + + pruss_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupts = <20 21 22 23 24 25 26 27>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + interrupt-controller; + #interrupt-cells = <3>; + }; + + pru0: pru@34000 { + compatible = "ti,am3356-pru"; + reg = <0x34000 0x2000>, + <0x22000 0x400>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am335x-pru0-fw"; + }; + + pru1: pru@38000 { + compatible = "ti,am3356-pru"; + reg = <0x38000 0x2000>, + <0x24000 0x400>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am335x-pru1-fw"; + }; + + pruss_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x90>; + clocks = <&dpll_core_m4_ck>; + clock-names = "fck"; + bus_freq = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + - | + + /* Example 2 AM43xx PRU-ICSS with PRUSS1 node */ + #include <dt-bindings/interrupt-controller/arm-gic.h> + pruss1: pruss@0 { + compatible = "ti,am4376-pruss"; + reg = <0x0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pruss1_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x8000>; + reg-names = "dram0", "dram1", "shrdram2"; + }; + + pruss1_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + reg = <0x26000 0x2000>; + }; + + pruss1_iep: iep@2e000 { + compatible = "ti,am3356-icss-iep"; + reg = <0x2e000 0x31c>; + clocks = <&pruss_iepclk_mux>; + }; + + pruss1_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x58>; + }; + + pruss1_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr6", + "host_intr7"; + interrupt-controller; + #interrupt-cells = <3>; + }; + + pru1_0: pru@34000 { + compatible = "ti,am4376-pru"; + reg = <0x34000 0x3000>, + <0x22000 0x400>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am437x-pru1_0-fw"; + }; + + pru1_1: pru@38000 { + compatible = "ti,am4376-pru"; + reg = <0x38000 0x3000>, + <0x24000 0x400>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am437x-pru1_1-fw"; + }; + + pruss1_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x90>; + clocks = <&dpll_core_m4_ck>; + clock-names = "fck"; + bus_freq = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + +... -- 2.7.4
