[PATCH 0/6] Add TI PRUSS platform driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

The Programmable Real-Time Unit and Industrial Communication Subsystem
(PRU-ICSS) is present on various TI SoCs. The IP is present on multiple TI SoC
architecture families including the OMAP architecture SoCs such as AM33xx,
AM437x and AM57xx; and on a Keystone 2 architecture based 66AK2G SoC. It is also
present on the Davinci based OMAPL138 SoCs and K3 architecture based AM65x and
J721E SoCs as well.

A PRUSS consists of dual 32-bit RISC cores (Programmable Real-Time Units, or
PRUs), shared RAM, data and instruction RAMs, some internal peripheral modules
to facilitate industrial communication, and an interrupt controller.

The programmable nature of the PRUs provide flexibility to implement custom
peripheral interfaces, fast real-time responses, or specialized data handling.
The common peripheral modules include the following,
  - an Ethernet MII_RT module with two MII ports
  - an MDIO port to control external Ethernet PHYs
  - an Industrial Ethernet Peripheral (IEP) to manage/generate Industrial
    Ethernet functions
  - an Enhanced Capture Module (eCAP)
  - an Industrial Ethernet Timer with 7/9 capture and 16 compare events
  - a 16550-compatible UART to support PROFIBUS
  - Enhanced GPIO with async capture and serial support


A typical usage scenario would be to load the application firmware into one or
more of the PRU cores, initialize one or more of the peripherals and perform I/O
through shared RAM from either a kernel driver or directly from userspace.

This series contains the PRUSS platform driver. This is the parent driver for
the entire PRUSS and is used for managing the subsystem level resources like
various memories and the CFG module.  It is responsible for the creation and
deletion of the platform devices for the child PRU devices and other child
devices (like Interrupt Controller, MDIO node and some syscon nodes) so that
they can be managed by specific platform drivers.

Grzegorz Jaszczyk (1):
  dt-bindings: soc: ti: Add TI PRUSS bindings

Suman Anna (5):
  soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs
  soc: ti: pruss: Add support for PRU-ICSSs on AM437x SoCs
  soc: ti: pruss: Add support for PRU-ICSS subsystems on AM57xx SoCs
  soc: ti: pruss: Add support for PRU-ICSS subsystems on 66AK2G SoC
  soc: ti: pruss: enable support for ICSSG subsystems on K3 AM65x SoCs

 .../devicetree/bindings/soc/ti/ti,pruss.yaml       | 383 +++++++++++++++++++++
 drivers/soc/ti/Kconfig                             |  11 +
 drivers/soc/ti/Makefile                            |   1 +
 drivers/soc/ti/pruss.c                             | 183 ++++++++++
 include/linux/pruss_driver.h                       |  48 +++
 5 files changed, 626 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
 create mode 100644 drivers/soc/ti/pruss.c
 create mode 100644 include/linux/pruss_driver.h

-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux