Re: [PATCH 07/15] iio: sx9310: Use long instead of int for channel bitmaps

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 28, 2020 at 6:14 PM Daniel Campello <campello@xxxxxxxxxxxx> wrote:
>
> Uses for_each_set_bit() macro to loop over channel bitmaps.
>

Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> Signed-off-by: Daniel Campello <campello@xxxxxxxxxxxx>
> ---
>
>  drivers/iio/proximity/sx9310.c | 24 +++++++++++++-----------
>  1 file changed, 13 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index fb5c16f2aa6b1a..2465064971d0a7 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -136,7 +136,8 @@ struct sx9310_data {
>         /* Remember enabled channels and sample rate during suspend. */
>         unsigned int suspend_ctrl0;
>         struct completion completion;
> -       unsigned int chan_read, chan_event;
> +       unsigned long chan_read;
> +       unsigned long chan_event;
>         int channel_users[SX9310_NUM_CHANNELS];
>         unsigned int whoami;
>  };
> @@ -279,15 +280,16 @@ static const struct regmap_config sx9310_regmap_config = {
>  };
>
>  static int sx9310_update_chan_en(struct sx9310_data *data,
> -                                unsigned int chan_read,
> -                                unsigned int chan_event)
> +                                unsigned long chan_read,
> +                                unsigned long chan_event)
>  {
>         int ret;
> +       unsigned long channels = chan_read | chan_event;
>
> -       if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
> +       if ((data->chan_read | data->chan_event) != channels) {
>                 ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
>                                          SX9310_REG_PROX_CTRL0_SENSOREN_MASK,
> -                                        chan_read | chan_event);
> +                                        channels);
>                 if (ret)
>                         return ret;
>         }
> @@ -538,13 +540,13 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
>                 return;
>         }
>
> -       for (chan = 0; chan < SX9310_NUM_CHANNELS; chan++) {
> +       for_each_set_bit(chan, &data->chan_event, SX9310_NUM_CHANNELS) {
>                 int dir;
>                 u64 ev;
> -               bool new_prox = val & BIT(chan);
> +               bool new_prox;
> +
> +               new_prox = val & BIT(chan);
>
> -               if (!(data->chan_event & BIT(chan)))
> -                       continue;
>                 if (new_prox == data->prox_stat[chan])
>                         /* No change on this channel. */
>                         continue;
> @@ -712,13 +714,13 @@ static irqreturn_t sx9310_trigger_handler(int irq, void *private)
>  static int sx9310_buffer_preenable(struct iio_dev *indio_dev)
>  {
>         struct sx9310_data *data = iio_priv(indio_dev);
> -       unsigned int channels = 0;
> +       unsigned long channels = 0;
>         int bit, ret;
>
>         mutex_lock(&data->mutex);
>         for_each_set_bit(bit, indio_dev->active_scan_mask,
>                          indio_dev->masklength)
> -               channels |= BIT(indio_dev->channels[bit].channel);
> +               __set_bit(indio_dev->channels[bit].channel, &channels);
>
>         ret = sx9310_update_chan_en(data, channels, data->chan_event);
>         mutex_unlock(&data->mutex);
> --
> 2.28.0.rc0.142.g3c755180ce-goog
>


-- 
With Best Regards,
Andy Shevchenko



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux