Now that we have support for GPIO lines of the SMARC connector, enable
LED support on the KBox A-230-LS. There are two LEDs without fixed
functions, one is yellow and one is green. Unfortunately, it is just one
multi-color LED, thus while it is possible to enable both at the same
time it is hard to tell the difference between "yellow only" and "yellow
and green".
Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
Changes since v5:
- changed the label, suggested by Pavel Machek
Changes since v4:
- none
Changes since v3:
- see cover letter
.../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 4b4cc6a1573d..8e5e289ce04f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -16,6 +16,20 @@
model = "Kontron KBox A-230-LS";
compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4",
"kontron,sl28", "fsl,ls1028a";
+
+ leds {
+ compatible = "gpio-leds";
+
+ alarm-led {
+ label = "yellow:alarm";
+ gpios = <&sl28cpld_gpio0 0 0>;
+ };
+
+ power-led {
+ label = "green:power";
+ gpios = <&sl28cpld_gpio1 3 0>;
+ };
+ };
};
&enetc_mdio_pf3 {
--
2.20.1
