Enable the kernel modules for the board management controller "sl28cpld" which is used on the SMARC-sAL28 board. Signed-off-by: Michael Walle <michael@xxxxxxxx> --- Changes since v5: - new patch arch/arm64/configs/defconfig | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index e0f33826819f..d45a33ccf7d7 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -500,6 +500,7 @@ CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_BD9571MWV=m CONFIG_GPIO_MAX77620=y +CONFIG_GPIO_SL28CPLD=m CONFIG_POWER_AVS=y CONFIG_QCOM_CPR=y CONFIG_ROCKCHIP_IODOMAIN=y @@ -513,6 +514,7 @@ CONFIG_SENSORS_ARM_SCPI=y CONFIG_SENSORS_LM90=m CONFIG_SENSORS_PWM_FAN=m CONFIG_SENSORS_RASPBERRYPI_HWMON=m +CONFIG_SENSORS_SL28CPLD=m CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_INA3221=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y @@ -535,6 +537,7 @@ CONFIG_QCOM_TSENS=y CONFIG_QCOM_SPMI_TEMP_ALARM=m CONFIG_UNIPHIER_THERMAL=y CONFIG_WATCHDOG=y +CONFIG_SL28CPLD_WATCHDOG=m CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ARM_SBSA_WATCHDOG=y CONFIG_ARM_SMC_WATCHDOG=y @@ -934,8 +937,10 @@ CONFIG_PWM_MESON=m CONFIG_PWM_RCAR=m CONFIG_PWM_ROCKCHIP=y CONFIG_PWM_SAMSUNG=y +CONFIG_PWM_SL28CPLD=m CONFIG_PWM_SUN4I=m CONFIG_PWM_TEGRA=m +CONFIG_SL28CPLD_INTC=y CONFIG_QCOM_PDC=y CONFIG_RESET_QCOM_AOSS=y CONFIG_RESET_QCOM_PDC=m -- 2.20.1
