From: "Vineetha G. Jaya Kumaran" <vineetha.g.jaya.kumaran@xxxxxxxxx> Hello, This patch set enables support for Ethernet on the Intel Keem Bay SoC. The first patch contains the required Device Tree bindings documentation, while the second patch adds the Intel platform glue layer for the stmmac device driver. This driver was tested on the Keem Bay evaluation module board. Thank you. Best regards, Vineetha Changes since v1: -Removed clocks maxItems property from DT bindings documentation -Removed phy compatible strings from DT bindings documentation Rusaimi Amira Ruslan (1): net: stmmac: Add dwmac-intel-plat for GBE driver Vineetha G. Jaya Kumaran (1): dt-bindings: net: Add bindings for Intel Keem Bay .../devicetree/bindings/net/intel,dwmac-plat.yaml | 121 +++++++++++++ drivers/net/ethernet/stmicro/stmmac/Kconfig | 10 ++ drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + .../net/ethernet/stmicro/stmmac/dwmac-intel-plat.c | 191 +++++++++++++++++++++ 4 files changed, 323 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c -- 1.9.1
