[PATCH net-next v2 5/7] ARM: dts: at91: sama5d3: add an mdio sub-node to macb

[Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>]

Use the new macb bindings and add an mdio sub-node to contain all the
phy nodes.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
---

Changes in v2:
 - none;

 arch/arm/boot/dts/at91-sama5d3_xplained.dts | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 61f068a7b362..25d2646ce4cb 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -133,8 +133,12 @@ macb0: ethernet@f0028000 {
 				#size-cells = <0>;
 				status = "okay";
 
-				ethernet-phy@7 {
-					reg = <0x7>;
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					ethernet-phy@7 {
+						reg = <0x7>;
+					};
 				};
 			};
 
@@ -200,8 +204,12 @@ macb1: ethernet@f802c000 {
 				#size-cells = <0>;
 				status = "okay";
 
-				ethernet-phy@1 {
-					reg = <0x1>;
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					ethernet-phy@1 {
+						reg = <0x1>;
+					};
 				};
 			};
 
-- 
2.25.1