Re: [PATCH v3] arm64: dts: qcom: sc7180: Add Display Port dt node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Tanmay Shah (2020-06-30 12:51:51)
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 31b9217bb5bf..271d55db62ab 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -2440,6 +2447,44 @@ dsi_phy: dsi-phy@ae94400 {
>  
>                                 status = "disabled";
>                         };
> +
> +                       msm_dp: displayport-controller@ae90000{
> +                               status = "disabled";
> +                               compatible = "qcom,sc7180-dp";
> +
> +                               reg = <0 0xae90000 0 0x1400>;

Please use full 8 digits in address, i.e. 0x0ae90000.

> +                               reg-names = "dp_controller";

reg-names is pretty useless here. Please remove it.

> +
> +                               interrupt-parent = <&mdss>;
> +                               interrupts = <12 0>;

Please use irq flags instead of 0.

> +
> +                               clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
> +                               clock-names = "core_iface", "core_aux", "ctrl_link",
> +                                             "ctrl_link_iface", "stream_pixel";
> +                               #clock-cells = <1>;
> +                               assigned-clocks = <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
> +                               assigned-clock-parents = <&msm_dp 1>;

Why don't we assign both clk parents here (&msm_dp 0) so that we don't
need any clk_set_parent() calls in the code?

> +
> +                               ports {
> +                                       #address-cells = <1>;
> +                                       #size-cells = <0>;
> +                                       port@0 {
> +                                               reg = <0>;
> +                                               dp_in: endpoint {
> +                                                       remote-endpoint = <&dpu_intf0_out>;
> +                                               };
> +                                       };
> +
> +                                       port@1 {
> +                                               reg = <1>;
> +                                               dp_out: endpoint { };
> +                                       };
> +                               };
> +                       };
>                 };
>  
>                 dispcc: clock-controller@af00000 {




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux