Add BCM63xx USBH PHY driver for BMIPS. v7: remove Simon from authors and introduce changes suggested by Rob: - Move clock conditions to the main section. - Set missing additionalProperties to false. v6: introduce changes suggested by Rob and Vinod: - Remove BMIPS_GENERIC default from kconfig. - Print registered message as debug. - Add another if case to device tree binding for SoCs with just 1 clock. - Ignored "additionalProperties: false" suggestion since it triggers a warning. This has been reported, but I haven't received any answer yet. v5: use devm_reset_control_get_exclusive. v4: fix dt-bindings documentation and improve device mode config. v3: introduce changes suggested by Florian: - Add support for device mode. v2: introduce changes suggested by Florian: - phy-cells changed to 1. - Drop OF dependency (use device_get_match_data). - Drop __initconst from variant tables. - Use devm_clk_get_optional. Álvaro Fernández Rojas (2): dt-bindings: phy: add bcm63xx-usbh bindings phy: bcm63xx-usbh: Add BCM63xx USBH driver .../bindings/phy/brcm,bcm63xx-usbh-phy.yaml | 79 +++ drivers/phy/broadcom/Kconfig | 8 + drivers/phy/broadcom/Makefile | 1 + drivers/phy/broadcom/phy-bcm63xx-usbh.c | 456 ++++++++++++++++++ 4 files changed, 544 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml create mode 100644 drivers/phy/broadcom/phy-bcm63xx-usbh.c -- 2.27.0
