Hi,
On Thu, Jul 16, 2020 at 07:52:58PM +0200, Sam Ravnborg wrote:
> On Thu, Jul 16, 2020 at 02:57:30PM +0200, Sebastian Reichel wrote:
> > Convert panel-dsi-cm bindings to YAML and add
> > missing properties while at it.
> >
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
>
> Hi Sebastian.
>
> Look good now. Applied this patch to drm-misc-next.
Thanks!
> $ ls Documentation/devicetree/bindings/display/panel/*.txt
> Documentation/devicetree/bindings/display/panel/display-timing.txt
>
> Nice :-)
Indeed.
> The DTS file changes needs to go in via another route.
No worries. I guess Tony will queue them up when he finds some time.
-- Sebastian
>
> Sam
>
> > ---
> > .../bindings/display/panel/panel-dsi-cm.txt | 29 -------
> > .../bindings/display/panel/panel-dsi-cm.yaml | 86 +++++++++++++++++++
> > 2 files changed, 86 insertions(+), 29 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt
> > create mode 100644 Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt
> > deleted file mode 100644
> > index dce48eb9db57..000000000000
> > --- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt
> > +++ /dev/null
> > @@ -1,29 +0,0 @@
> > -Generic MIPI DSI Command Mode Panel
> > -===================================
> > -
> > -Required properties:
> > -- compatible: "panel-dsi-cm"
> > -
> > -Optional properties:
> > -- label: a symbolic name for the panel
> > -- reset-gpios: panel reset gpio
> > -- te-gpios: panel TE gpio
> > -
> > -Required nodes:
> > -- Video port for DSI input
> > -
> > -Example
> > --------
> > -
> > -lcd0: display {
> > - compatible = "tpo,taal", "panel-dsi-cm";
> > - label = "lcd0";
> > -
> > - reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
> > -
> > - port {
> > - lcd0_in: endpoint {
> > - remote-endpoint = <&dsi1_out_ep>;
> > - };
> > - };
> > -};
> > diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
> > new file mode 100644
> > index 000000000000..d766c949c622
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
> > @@ -0,0 +1,86 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: DSI command mode panels
> > +
> > +maintainers:
> > + - Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> > + - Sebastian Reichel <sre@xxxxxxxxxx>
> > +
> > +description: |
> > + This binding file is a collection of the DSI panels that
> > + are usually driven in command mode. If no backlight is
> > + referenced via the optional backlight property, the DSI
> > + panel is assumed to have native backlight support.
> > + The panel may use an OF graph binding for the association
> > + to the display, or it may be a direct child node of the
> > + display.
> > +
> > +allOf:
> > + - $ref: panel-common.yaml#
> > +
> > +properties:
> > +
> > + compatible:
> > + items:
> > + - enum:
> > + - motorola,droid4-panel # Panel from Motorola Droid4 phone
> > + - nokia,himalaya # Panel from Nokia N950 phone
> > + - tpo,taal # Panel from OMAP4 SDP board
> > + - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback
> > +
> > + reg:
> > + maxItems: 1
> > + description: DSI virtual channel
> > +
> > + vddi-supply:
> > + description:
> > + Display panels require power to be supplied. While several panels need
> > + more than one power supply with panel-specific constraints governing the
> > + order and timings of the power supplies, in many cases a single power
> > + supply is sufficient, either because the panel has a single power rail, or
> > + because all its power rails can be driven by the same supply. In that case
> > + the vddi-supply property specifies the supply powering the panel as a
> > + phandle to a regulator.
> > +
> > + vpnl-supply:
> > + description:
> > + When the display panel needs a second power supply, this property can be
> > + used in addition to vddi-supply. Both supplies will be enabled at the
> > + same time before the panel is being accessed.
> > +
> > + width-mm: true
> > + height-mm: true
> > + label: true
> > + rotation: true
> > + panel-timing: true
> > + port: true
> > + reset-gpios: true
> > + te-gpios: true
> > + backlight: true
> > +
> > +additionalProperties: false
> > +
> > +required:
> > + - compatible
> > + - reg
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > +
> > + dsi-controller {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + panel@0 {
> > + compatible = "tpo,taal", "panel-dsi-cm";
> > + reg = <0>;
> > + reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
> > + };
> > + };
> > +
> > +...
> > --
> > 2.27.0
Attachment:
signature.asc
Description: PGP signature
