Convert panel-dsi-cm bindings to YAML and add
missing properties while at it.
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
---
.../bindings/display/panel/panel-dsi-cm.txt | 29 -------
.../bindings/display/panel/panel-dsi-cm.yaml | 86 +++++++++++++++++++
2 files changed, 86 insertions(+), 29 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt
deleted file mode 100644
index dce48eb9db57..000000000000
--- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Generic MIPI DSI Command Mode Panel
-===================================
-
-Required properties:
-- compatible: "panel-dsi-cm"
-
-Optional properties:
-- label: a symbolic name for the panel
-- reset-gpios: panel reset gpio
-- te-gpios: panel TE gpio
-
-Required nodes:
-- Video port for DSI input
-
-Example
--------
-
-lcd0: display {
- compatible = "tpo,taal", "panel-dsi-cm";
- label = "lcd0";
-
- reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
-
- port {
- lcd0_in: endpoint {
- remote-endpoint = <&dsi1_out_ep>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
new file mode 100644
index 000000000000..d766c949c622
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DSI command mode panels
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@xxxxxx>
+ - Sebastian Reichel <sre@xxxxxxxxxx>
+
+description: |
+ This binding file is a collection of the DSI panels that
+ are usually driven in command mode. If no backlight is
+ referenced via the optional backlight property, the DSI
+ panel is assumed to have native backlight support.
+ The panel may use an OF graph binding for the association
+ to the display, or it may be a direct child node of the
+ display.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+
+ compatible:
+ items:
+ - enum:
+ - motorola,droid4-panel # Panel from Motorola Droid4 phone
+ - nokia,himalaya # Panel from Nokia N950 phone
+ - tpo,taal # Panel from OMAP4 SDP board
+ - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ vddi-supply:
+ description:
+ Display panels require power to be supplied. While several panels need
+ more than one power supply with panel-specific constraints governing the
+ order and timings of the power supplies, in many cases a single power
+ supply is sufficient, either because the panel has a single power rail, or
+ because all its power rails can be driven by the same supply. In that case
+ the vddi-supply property specifies the supply powering the panel as a
+ phandle to a regulator.
+
+ vpnl-supply:
+ description:
+ When the display panel needs a second power supply, this property can be
+ used in addition to vddi-supply. Both supplies will be enabled at the
+ same time before the panel is being accessed.
+
+ width-mm: true
+ height-mm: true
+ label: true
+ rotation: true
+ panel-timing: true
+ port: true
+ reset-gpios: true
+ te-gpios: true
+ backlight: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi-controller {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "tpo,taal", "panel-dsi-cm";
+ reg = <0>;
+ reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
--
2.27.0
