[PATCH v3 0/3] Add support for Ingenic X1830 SoC and Y&A CU1830-Neo board.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



v2->v3:
Adjust the order of nodes according to the
corresponding address value.

周琰杰 (Zhou Yanjie) (3):
  MIPS: Ingenic: Add Ingenic X1830 support.
  dt-bindings: MIPS: Add Ingenic X1830 based boards.
  MIPS: Ingenic: Add YSH & ATIL CU Neo board support.

 .../devicetree/bindings/mips/ingenic/devices.yaml  |  12 +-
 arch/mips/boot/dts/ingenic/Makefile                |   1 +
 arch/mips/boot/dts/ingenic/cu1830-neo.dts          | 168 ++++++++++++
 arch/mips/boot/dts/ingenic/x1830.dtsi              | 300 +++++++++++++++++++++
 arch/mips/configs/cu1830-neo_defconfig             | 123 +++++++++
 arch/mips/jz4740/Kconfig                           |  10 +
 6 files changed, 611 insertions(+), 3 deletions(-)
 create mode 100644 arch/mips/boot/dts/ingenic/cu1830-neo.dts
 create mode 100644 arch/mips/boot/dts/ingenic/x1830.dtsi
 create mode 100644 arch/mips/configs/cu1830-neo_defconfig

-- 
2.11.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux