Document dwc3 qcom phy hs and ss phy bindings needed to correctly inizialize and use usb on ipq806x SoC. Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- v7: * Drop useless AllOf v6: * Add maximum value v5: * Fix dt_binding_check error v4: * Add qcom to specific bindings v3: * Use explicit reg instead of regmap .../bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 55 ++++++++++++++ .../bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 73 +++++++++++++++++++ 2 files changed, 128 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml new file mode 100644 index 000000000000..23887ebe08fd --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,ipq806x-usb-phy-hs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ipq806x usb DWC3 HS PHY CONTROLLER + +maintainers: + - Ansuel Smith <ansuelsmth@xxxxxxxxx> + +description: + DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer + controllers used in ipq806x. Each DWC3 PHY controller should have its + own node. + +properties: + compatible: + const: qcom,ipq806x-usb-phy-hs + + "#phy-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: ref + - const: xo + +required: + - compatible + - "#phy-cells" + - reg + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-ipq806x.h> + + hs_phy_0: phy@110f8800 { + compatible = "qcom,ipq806x-usb-phy-hs"; + reg = <0x110f8800 0x30>; + clocks = <&gcc USB30_0_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml new file mode 100644 index 000000000000..fa30c24b4405 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,ipq806x-usb-phy-ss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ipq806x usb DWC3 SS PHY CONTROLLER + +maintainers: + - Ansuel Smith <ansuelsmth@xxxxxxxxx> + +description: + DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer + controllers used in ipq806x. Each DWC3 PHY controller should have its + own node. + +properties: + compatible: + const: qcom,ipq806x-usb-phy-ss + + "#phy-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: ref + - const: xo + + qcom,rx-eq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Override value for rx_eq. + default: 4 + maximum: 7 + + qcom,tx-deamp-3_5db: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Override value for transmit preemphasis. + default: 23 + maximum: 63 + + qcom,mpll: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Override value for mpll. + default: 0 + maximum: 7 + +required: + - compatible + - "#phy-cells" + - reg + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-ipq806x.h> + + ss_phy_0: phy@110f8830 { + compatible = "qcom,ipq806x-usb-phy-ss"; + reg = <0x110f8830 0x30>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + }; -- 2.27.0
