On Wed, Jun 17, 2020 at 09:38:20AM +0200, Martin Kepplinger wrote: > From: "Angus Ainslie (Purism)" <angus@xxxxxxxx> > > Add a devicetree description for the Librem 5 phone. The early batches > that have been sold are supported as well as the mass-produced device > available later this year, see https://puri.sm/products/librem-5/ > > This boots to a working console with working WWAN modem, wifi usdhc, > IMU sensor device, proximity sensor, haptic motor, gpio keys, GNSS and LEDs. > > Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx> > Signed-off-by: Angus Ainslie (Purism) <angus@xxxxxxxx> > Signed-off-by: Guido Günther <agx@xxxxxxxxxxx> > For audio related part: > Reviewed-by: Daniel Baluta <daniel.baluta@xxxxxxx> > --- > > revision history > ---------------- > v3: > thanks a lot Mark for reviewing! changes since v2: > * nicer audio cards names > * squash unneeded audio_pwr regulator > * remove the unneeded susphy_quirk from dwc3_1 after more testing > * add usdhc2 card detect via gpio > * add headphone detect for audio card > > v2: > thanks a lot Marco, Daniel and Pavel for reviewing. changes since v1: > * alphabetical sortings / more consistent node names > * remove unused regulator and pinctrl descriptions > * generic labels for leds, backlight, flash and torch > * audio clk settings moved to sai2 node > https://lore.kernel.org/linux-arm-kernel/20200604084756.586-1-martin.kepplinger@xxxxxxx/T/ > > v1: > https://lore.kernel.org/linux-arm-kernel/20200514155737.12160-1-martin.kepplinger@xxxxxxx/ > > > > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../boot/dts/freescale/imx8mq-librem5.dts | 1137 +++++++++++++++++ > 2 files changed, 1138 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index cd38d04da5a7..342579121f98 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -34,6 +34,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb > diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dts > new file mode 100644 > index 000000000000..06ffa12e60f7 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dts > @@ -0,0 +1,1137 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2018-2020 Purism SPC > + */ > + > +/dts-v1/; > + > +#include "dt-bindings/input/input.h" > +#include "dt-bindings/pwm/pwm.h" > +#include "dt-bindings/usb/pd.h" > +#include "imx8mq.dtsi" > + > +/ { > + model = "Purism Librem 5"; > + compatible = "purism,librem5", "fsl,imx8mq"; Is the compatible documented? > + > + backlight_dsi: backlight-dsi { > + compatible = "led-backlight"; > + leds = <&led_backlight>; > + brightness-levels = <255>; > + default-brightness-level = <100>; I'm not sure these two properties are coded correctly, you may want to double check the bindings doc. > + }; > + > + pmic_osc: clock-pmic { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + clock-output-names = "pmic_osc"; > + }; > + > + chosen { > + stdout-path = &uart1; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_keys>; > + > + vol-down { > + label = "VOL_DOWN"; > + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEDOWN>; > + }; > + > + vol-up { > + label = "VOL_UP"; > + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + }; > + }; > + > + pwmleds { > + compatible = "pwm-leds"; > + > + blue { > + label = "blue:status"; > + max-brightness = <248>; > + pwms = <&pwm2 0 50000>; > + }; > + > + green { > + label = "green:status"; > + max-brightness = <248>; > + pwms = <&pwm4 0 50000>; > + }; > + > + red { > + label = "red:status"; > + max-brightness = <248>; > + pwms = <&pwm3 0 50000>; > + }; > + }; > + > + reg_aud_1v8: regulator-audio-1v8 { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_audiopwr>; > + regulator-name = "AUDIO_PWR_EN"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_gnss: regulator-gnss { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gnsspwr>; > + regulator-name = "GNSS"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_hub: regulator-hub { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hub_pwr>; > + regulator-name = "HUB"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_lcd_3v4: regulator-lcd-3v4 { > + compatible = "regulator-fixed"; > + regulator-name = "LCD_3V4"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_dsibiasen>; > + vin-supply = <®_vsys_3v4>; > + enable-active-high; Nit: can we consistently put 'enable-active-high' after 'gpio' node? > + gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; > + }; > + > + reg_vdd_sen: regulator-vdd-sen { > + compatible = "regulator-fixed"; > + regulator-name = "VDD_SEN"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + reg_vdd_3v3: regulator-vdd-3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VDD_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + reg_vdd_1v8: regulator-vdd-1v8 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_1V8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + reg_vsys_3v4: regulator-vsys-3v4 { > + compatible = "regulator-fixed"; > + regulator-name = "VSYS_3V4"; > + regulator-min-microvolt = <3400000>; > + regulator-max-microvolt = <3400000>; > + regulator-always-on; > + }; > + > + reg_wifi_3v3: regulator-wifi-3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "3V3_WIFI"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + sound { > + compatible = "simple-audio-card"; > + pinctrl-0 = <&pinctrl_hp>; > + simple-audio-card,name = "Librem 5"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,widgets = > + "Headphone", "Headphones", > + "Microphone", "Headset Mic", > + "Microphone", "Digital Mic", > + "Speaker", "Speaker"; > + simple-audio-card,routing = > + "Headphones", "HPOUTL", > + "Headphones", "HPOUTR", > + "Speaker", "SPKOUTL", > + "Speaker", "SPKOUTR", > + "Headset Mic", "MICBIAS", > + "IN3R", "Headset Mic", > + "DMICDAT", "Digital Mic"; > + simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; > + > + simple-audio-card,cpu { > + sound-dai = <&sai2>; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&codec>; > + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; > + frame-master; > + bitclock-master; > + }; > + }; > + > + sound-wwan { > + compatible = "simple-audio-card"; > + simple-audio-card,name = "Modem"; > + simple-audio-card,format = "i2s"; > + > + simple-audio-card,cpu { > + sound-dai = <&sai6>; > + frame-inversion; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&bm818_codec>; > + frame-master; > + bitclock-master; > + }; > + }; > + > + bm818_codec: sound-wwan-codec { > + compatible = "broadmobi,bm818", "option,gtm601"; > + #sound-dai-cells = <0>; > + }; > + > + vibrator { > + compatible = "pwm-vibrator"; > + pwms = <&pwm1 0 1000000000 0>; > + pwm-names = "enable"; > + vcc-supply = <®_vdd_3v3>; > + }; > +}; > + > +&A53_0 { > + cpu-supply = <&buck2_reg>; > +}; > + > +&A53_1 { > + cpu-supply = <&buck2_reg>; > +}; > + > +&A53_2 { > + cpu-supply = <&buck2_reg>; > +}; > + > +&A53_3 { > + cpu-supply = <&buck2_reg>; > +}; > + > +&ddrc { > + operating-points-v2 = <&ddrc_opp_table>; > + > + ddrc_opp_table: ddrc-opp-table { > + compatible = "operating-points-v2"; > + > + opp-25M { > + opp-hz = /bits/ 64 <25000000>; > + }; Have a newline between nodes. > + opp-100M { > + opp-hz = /bits/ 64 <100000000>; > + }; > + opp-800M { > + opp-hz = /bits/ 64 <800000000>; > + }; > + }; > +}; > + > +&dphy { > + status = "okay"; > +}; > + > +&ecspi1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi1>; > + cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + nor_flash: flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <1000000>; > + }; > +}; > + > +&gpio1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pmic_5v>; > + > + pmic-5v { > + gpio-hog; > + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; > + input; > + }; > +}; > + > +&iomuxc { > + pinctrl_audiopwr: audiopwrgrp { > + fsl,pins = < > + /* AUDIO_POWER_EN_3V3 */ > + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x83 > + >; > + }; > + > + pinctrl_bl: blgrp { > + fsl,pins = < > + /* BACKLINGE_EN */ > + MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x83 > + >; > + }; > + > + pinctrl_charger_in: chargeringrp { > + fsl,pins = < > + /* CHRG_INT */ > + MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80 > + /* CHG_STATUS_B */ > + MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80 > + >; > + }; > + > + pinctrl_dsibiasen: dsibiasengrp { > + fsl,pins = < > + /* DSI_BIAS_EN */ > + MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20 0x83 > + >; > + }; > + > + pinctrl_dsien: dsiengrp { > + fsl,pins = < > + /* DSI_EN_3V3 */ > + MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x83 > + >; > + }; > + > + pinctrl_ecspi1: spi1grp { > + fsl,pins = < > + MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x83 > + MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x83 > + MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 > + MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x83 > + >; > + }; > + > + pinctrl_gauge: gaugegrp { > + fsl,pins = < > + /* BAT_LOW */ > + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x80 > + >; > + }; > + > + pinctrl_gnsspwr: gnsspwrgrp { > + fsl,pins = < > + /* GPS3V3_EN */ > + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x83 > + >; > + }; > + > + pinctrl_haptic: hapticgrp { > + fsl,pins = < > + /* MOTO */ > + MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x83 > + >; > + }; > + > + pinctrl_hp: hpgrp { > + fsl,pins = < > + /* HEADPHONE_DET_1V8 */ > + MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x180 > + >; > + }; > + > + pinctrl_hub_pwr: hubpwrgrp { > + fsl,pins = < > + /* HUB_PWR_3V3_EN */ > + MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x83 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000026 > + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000026 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000026 > + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000026 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000026 > + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000026 > + >; > + }; > + > + pinctrl_i2c4: i2c4grp { > + fsl,pins = < > + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000026 > + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000026 > + >; > + }; > + > + pinctrl_keys: keysgrp { > + fsl,pins = < > + /* VOL- */ > + MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17 0x01C0 > + /* VOL+ */ > + MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16 0x01C0 > + >; > + }; > + > + pinctrl_led_b: ledbgrp { > + fsl,pins = < > + /* LED_B */ > + MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x06 > + >; > + }; > + > + pinctrl_led_g: ledggrp { > + fsl,pins = < > + /* LED_G */ > + MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT 0x06 > + >; > + }; > + > + pinctrl_led_r: ledrgrp { > + fsl,pins = < > + /* LED_R */ > + MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT 0x06 > + >; > + }; > + > + pinctrl_mag: maggrp { > + fsl,pins = < > + /* INT_MAG */ > + MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x80 > + >; > + }; > + > + pinctrl_pmic: pmicgrp { > + fsl,pins = < > + /* PMIC_NINT */ > + MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x80 > + >; > + }; > + > + pinctrl_pmic_5v: pmic5vgrp { > + fsl,pins = < > + /* PMIC_5V */ > + MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x80 > + >; > + }; > + > + pinctrl_prox: proxgrp { > + fsl,pins = < > + /* INT_LIGHT */ > + MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x80 > + >; > + }; > + > + pinctrl_rtc: rtcgrp { > + fsl,pins = < > + /* RTC_INT */ > + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x80 > + >; > + }; > + > + pinctrl_sai2: sai2grp { > + fsl,pins = < > + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 > + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 > + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 > + MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 > + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 > + >; > + }; > + > + pinctrl_sai6: sai6grp { > + fsl,pins = < > + MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0xd6 > + MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0xd6 > + MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0xd6 > + MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0xd6 > + >; > + }; > + > + pinctrl_tcpc: tcpcgrp { > + fsl,pins = < > + /* TCPC_INT */ > + MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x01C0 > + >; > + }; > + > + pinctrl_typec: typecgrp { > + fsl,pins = < > + /* TYPEC_MUX_EN */ > + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x83 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 > + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 > + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 > + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 > + >; > + }; > + > + pinctrl_uart4: uart4grp { > + fsl,pins = < > + MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49 > + MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49 > + MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49 > + MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49 > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 > + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 > + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 > + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 > + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 > + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 > + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 > + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 > + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 > + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 > + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 > + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 > + >; > + }; > + > + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { > + fsl,pins = < > + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d > + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd > + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd > + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd > + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd > + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd > + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd > + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd > + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd > + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd > + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d > + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 > + >; > + }; > + > + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { > + fsl,pins = < > + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f > + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf > + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf > + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf > + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf > + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf > + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf > + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf > + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf > + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf > + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f > + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 > + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 > + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 > + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 > + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 > + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 > + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 > + MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 > + >; > + }; > + > + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { > + fsl,pins = < > + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 > + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d > + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd > + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd > + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd > + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd > + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd > + MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 > + >; > + }; > + > + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { > + fsl,pins = < > + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 > + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f > + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf > + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf > + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf > + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf > + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf > + MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + /* nWDOG */ > + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x1f > + >; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <387000>; This frequency setting looks special. Why cannot it be 400k? > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + typec_pd: usb-pd@3f { > + compatible = "ti,tps6598x"; > + reg = <0x3f>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_typec>, <&pinctrl_tcpc>; > + interrupt-parent = <&gpio1>; > + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; > + > + connector { > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + usb_con_hs: endpoint { > + remote-endpoint = <&typec_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + usb_con_ss: endpoint { > + remote-endpoint = <&typec_ss>; > + }; > + }; > + }; > + }; > + }; > + > + pmic: pmic@4b { > + compatible = "rohm,bd71837"; > + reg = <0x4b>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pmic>; > + clocks = <&pmic_osc>; > + clock-names = "osc"; > + clock-output-names = "pmic_clk"; > + interrupt-parent = <&gpio1>; > + interrupts = <7 GPIO_ACTIVE_LOW>; > + interrupt-names = "irq"; > + rohm,reset-snvs-powered; > + > + regulators { > + buck1_reg: BUCK1 { > + regulator-name = "BUCK1"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1300000>; > + regulator-ramp-delay = <1250>; > + rohm,dvs-run-voltage = <900000>; > + rohm,dvs-idle-voltage = <850000>; > + rohm,dvs-suspend-voltage = <800000>; > + regulator-always-on; > + }; > + > + buck2_reg: BUCK2 { > + regulator-name = "BUCK2"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1300000>; > + regulator-ramp-delay = <1250>; > + rohm,dvs-run-voltage = <1000000>; > + rohm,dvs-idle-voltage = <900000>; > + regulator-always-on; > + }; > + > + buck3_reg: BUCK3 { > + regulator-name = "BUCK3"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1300000>; > + rohm,dvs-run-voltage = <900000>; > + regulator-always-on; > + }; > + > + buck4_reg: BUCK4 { > + regulator-name = "BUCK4"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1300000>; > + rohm,dvs-run-voltage = <1000000>; > + }; > + > + buck5_reg: BUCK5 { > + regulator-name = "BUCK5"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + }; > + > + buck6_reg: BUCK6 { > + regulator-name = "BUCK6"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + buck7_reg: BUCK7 { > + regulator-name = "BUCK7"; > + regulator-min-microvolt = <1605000>; > + regulator-max-microvolt = <1995000>; > + regulator-always-on; > + }; > + > + buck8_reg: BUCK8 { > + regulator-name = "BUCK8"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1400000>; > + regulator-always-on; > + }; > + > + ldo1_reg: LDO1 { > + regulator-name = "LDO1"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + /* leave on for snvs power button */ > + regulator-always-on; > + }; > + > + ldo2_reg: LDO2 { > + regulator-name = "LDO2"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + /* leave on for snvs power button */ > + regulator-always-on; > + }; > + > + ldo3_reg: LDO3 { > + regulator-name = "LDO3"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "LDO4"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo5_reg: LDO5 { > + /* VDD_PHY_0V9 - MIPI and HDMI domains */ > + regulator-name = "LDO5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + ldo6_reg: LDO6 { > + /* VDD_PHY_0V9 - MIPI, HDMI and USB domains */ > + regulator-name = "LDO6"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo7_reg: LDO7 { > + /* VDD_PHY_3V3 - USB domain */ > + regulator-name = "LDO7"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + }; > + }; > + > + rtc@68 { > + compatible = "microcrystal,rv4162"; > + reg = <0x68>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rtc>; > + interrupt-parent = <&gpio1>; > + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <387000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + magnetometer@1e { > + compatible = "st,lsm9ds1-magn"; > + reg = <0x1e>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_mag>; > + interrupt-parent = <&gpio3>; > + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; > + vdd-supply = <®_vdd_sen>; > + vddio-supply = <®_vdd_1v8>; > + }; > + > + regulator@3e { > + compatible = "tps65132"; > + reg = <0x3e>; Have a newline between property list and child node. > + outp { > + regulator-name = "LCD_AVDD"; > + vin-supply = <®_lcd_3v4>; > + }; > + > + outn { > + regulator-name = "LCD_AVEE"; > + vin-supply = <®_lcd_3v4>; > + }; > + }; > + > + flash@53 { > + compatible = "lm3560"; > + reg = <0x53>; > + #address-cells = <1>; > + #size-cells = <0>; > + flash@0 { > + reg = <0x0>; > + flash-timeout-us = <150000>; > + flash-max-microamp = <320000>; > + led-max-microamp = <60000>; > + label = "flash"; > + }; > + > + torch@1 { > + reg = <0x1>; > + led-max-microamp = <10000>; > + label = "torch"; > + }; > + > + }; > + > + prox@60 { > + compatible = "vishay,vcnl4040"; > + reg = <0x60>; > + pinctrl-0 = <&pinctrl_prox>; > + interrupt-parent = <&gpio3>; > + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + accel-gyro@6a { > + compatible = "st,lsm9ds1-imu"; > + reg = <0x6a>; > + vdd-supply = <®_vdd_sen>; > + vddio-supply = <®_vdd_1v8>; > + mount-matrix = "1", "0", "0", > + "0", "1", "0", > + "0", "0", "-1"; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <387000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > + > + codec: audio-codec@1a { > + compatible = "wlf,wm8962"; > + reg = <0x1a>; // 0x4a is the test address > + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; > + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; > + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; > + assigned-clock-rates = <24576000>; > + #sound-dai-cells = <0>; > + mic-cfg = <0x200>; > + DCVDD-supply = <®_aud_1v8>; > + DBVDD-supply = <®_aud_1v8>; > + AVDD-supply = <®_aud_1v8>; > + CPVDD-supply = <®_aud_1v8>; > + MICVDD-supply = <®_aud_1v8>; > + PLLVDD-supply = <®_aud_1v8>; > + SPKVDD1-supply = <®_vsys_3v4>; > + SPKVDD2-supply = <®_vsys_3v4>; > + gpio-cfg = < > + 0x0000 /* n/c */ > + 0x0001 /* gpio2, 1: default */ > + 0x0013 /* gpio3, 2: dmicclk */ > + 0x0000 /* n/c, 3: default */ > + 0x8014 /* gpio5, 4: dmic_dat */ > + 0x0000 /* gpio6, 5: default */ > + >; > + }; > + > + backlight@36 { > + compatible = "ti,lm36922"; > + reg = <0x36>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_bl>; > + #address-cells = <1>; > + #size-cells = <0>; > + Drop this newline. Shawn > + enable-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; > + vled-supply = <®_vsys_3v4>; > + ti,ovp-microvolt = <25000000>; > + > + led_backlight: led@0 { > + reg = <0>; > + label = ":backlight"; > + linux,default-trigger = "backlight"; > + led-max-microamp = <20000>; > + }; > + }; > + > + touchscreen@38 { > + compatible = "edt,edt-ft5506"; > + reg = <0x38>; > + interrupt-parent = <&gpio1>; > + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; > + touchscreen-size-x = <720>; > + touchscreen-size-y = <1440>; > + }; > +}; > + > +&i2c4 { > + clock-frequency = <387000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c4>; > + status = "okay"; > + > + bat: fuel-gauge@36 { > + compatible = "maxim,max17055"; > + reg = <0x36>; > + interrupt-parent = <&gpio3>; > + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gauge>; > + maxim,over-heat-temp = <700>; > + maxim,over-volt = <4500>; > + maxim,rsns-microohm = <5000>; > + }; > + > + charger@6a { > + compatible = "ti,bq25890"; > + reg = <0x6a>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_charger_in>; > + interrupt-parent = <&gpio3>; > + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; > + phys = <&usb3_phy0>; > + ti,battery-regulation-voltage = <4192000>; /* uV */ > + ti,charge-current = <1600000>; /* uA */ > + ti,termination-current = <66000>; /* uA */ > + ti,precharge-current = <130000>; /* uA */ > + ti,minimum-sys-voltage = <3700000>; /* uV */ > + ti,boost-voltage = <5000000>; /* uV */ > + ti,boost-max-current = <50000>; /* uA */ > + ti,use-vinmin-threshold = <1>; /* enable VINDPM */ > + ti,vinmin-threshold = <3900000>; /* uV */ > + monitored-battery = <&bat>; > + }; > +}; > + > +&pgc_gpu { > + power-supply = <&buck3_reg>; > +}; > + > +&pgc_mipi { > + power-supply = <&ldo5_reg>; > +}; > + > +&pgc_vpu { > + power-supply = <&buck4_reg>; > +}; > + > +&pwm1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_haptic>; > + status = "okay"; > +}; > + > +&pwm2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_led_b>; > + status = "okay"; > +}; > + > +&pwm3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_led_g>; > + status = "okay"; > +}; > + > +&pwm4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_led_r>; > + status = "okay"; > +}; > + > +&sai2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sai2>; > + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; > + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; > + assigned-clock-rates = <24576000>; > + assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>; > + assigned-clock-rates = <786432000>, <722534400>; > + status = "okay"; > +}; > + > +&sai6 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sai6>; > + assigned-clocks = <&clk IMX8MQ_CLK_SAI6>; > + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; > + assigned-clock-rates = <24576000>; > + fsl,sai-synchronous-rx; > + status = "okay"; > +}; > + > +&snvs_pwrkey { > + status = "okay"; > +}; > + > +&snvs_rtc { > + status = "disabled"; > +}; > + > +&uart1 { /* console */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + status = "okay"; > +}; > + > +&uart2 { /* TPS - GPS - DEBUG */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + status = "okay"; > + > + gnss { > + compatible = "globaltop,pa6h"; > + vcc-supply = <®_gnss>; > + current-speed = <9600>; > + }; > +}; > + > +&uart3 { /* SMC */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3>; > + status = "okay"; > +}; > + > +&uart4 { /* BT */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart4>; > + uart-has-rtscts; > + status = "okay"; > +}; > + > +&usb3_phy0 { > + status = "okay"; > +}; > + > +&usb3_phy1 { > + vbus-supply = <®_hub>; > + status = "okay"; > +}; > + > +&usb_dwc3_0 { > + #address-cells = <1>; > + #size-cells = <0>; > + dr_mode = "otg"; > + snps,dis_u3_susphy_quirk; > + status = "okay"; > + > + port@0 { > + reg = <0>; > + > + typec_hs: endpoint { > + remote-endpoint = <&usb_con_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + typec_ss: endpoint { > + remote-endpoint = <&usb_con_ss>; > + }; > + }; > +}; > + > +&usb_dwc3_1 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +&usdhc1 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; > + bus-width = <8>; > + vmmc-supply = <®_vdd_3v3>; > + power-supply = <®_vdd_1v8>; > + non-removable; > + status = "okay"; > +}; > + > +&usdhc2 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; > + bus-width = <4>; > + vmmc-supply = <®_wifi_3v3>; > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; > + disable-wp; > + cap-sdio-irq; > + keep-power-in-suspend; > + wakeup-source; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > + status = "okay"; > +}; > -- > 2.20.1 >
