With silicon revision 2.0, add support for SD card on the am65x-evm. Boards with silicon revision 1.0 are susceptible to interface issues because of erratas i2025 and i2026[1] and are recommended to disable this node. [1] Am654x Silicon Revision 1.0 errata: https://www.ti.com/lit/pdf/sprz452 Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx> --- .../arm64/boot/dts/ti/k3-am654-base-board.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 9fc7898a6a3b..84aeb4761ac0 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -167,6 +167,19 @@ >; }; + main_mmc1_pins_default: main_mmc1_pins_default { + pinctrl-single,pins = < + AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ + AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ + AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ + AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ + AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ + AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ + AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ + AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */ + >; + }; + usb1_pins_default: usb1_pins_default { pinctrl-single,pins = < AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ @@ -299,6 +312,17 @@ ti,driver-strength-ohm = <50>; disable-wp; }; +/* + * Because of erratas i2025 and i2026 for silicon revision 1.0, the + * SD card interface might fail. Boards with sr1.0 are recommended to + * disable sdhci1 + */ +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; &dwc3_1 { status = "okay"; -- 2.17.1
