On Thu, Jun 25, 2020 at 5:46 AM Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx> wrote:
>
> Setup an RGB HW pipe as cursor which can be used on
> secondary interface.
>
> For SC7180 2 HW pipes are enumerated as cursors
> 1 - primary interface
> 2 - secondary interface
>
> Signed-off-by: Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 8f2357d..23061fd 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -117,10 +117,10 @@
> .reg_off = 0x2AC, .bit_off = 0},
> .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> .reg_off = 0x2AC, .bit_off = 8},
> - .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> - .reg_off = 0x2B4, .bit_off = 8},
> .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> - .reg_off = 0x2BC, .bit_off = 8},
> + .reg_off = 0x2B4, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> + .reg_off = 0x2C4, .bit_off = 8},
It looks like you shifted the register offset here from 0x2bc to
0x2c4, was that intentional?
BR,
-R
> },
> };
>
> @@ -272,10 +272,10 @@
> sc7180_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
> SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
> sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
> - SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
> - sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
> + SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_CURSOR_SDM845_MASK,
> + sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
> SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_SDM845_MASK,
> - sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
> + sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
> };
>
> /*************************************************************
> --
> 1.9.1
>
