Setup an RGB HW pipe as cursor which can be used on
secondary interface.
For SC7180 2 HW pipes are enumerated as cursors
1 - primary interface
2 - secondary interface
Signed-off-by: Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 8f2357d..23061fd 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -117,10 +117,10 @@
.reg_off = 0x2AC, .bit_off = 0},
.clk_ctrls[DPU_CLK_CTRL_DMA0] = {
.reg_off = 0x2AC, .bit_off = 8},
- .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
- .reg_off = 0x2B4, .bit_off = 8},
.clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
- .reg_off = 0x2BC, .bit_off = 8},
+ .reg_off = 0x2B4, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
+ .reg_off = 0x2C4, .bit_off = 8},
},
};
@@ -272,10 +272,10 @@
sc7180_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
- SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
- sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
+ SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_CURSOR_SDM845_MASK,
+ sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_SDM845_MASK,
- sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
+ sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
};
/*************************************************************
--
1.9.1
