From: Andrew Lunn <andrew@xxxxxxx>
The SFF soldered onto the board expect the ports to use 1000BaseX. It
makes no sense to have the ports set to SGMII, since they don't even
support that mode.
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Chris Healy <cphealy@xxxxxxxxx>
---
v2:
- convert spaces back to tabs
- Correct from line to show Andrew as the original author
arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index b642520199ba..040a1f8b6130 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -186,7 +186,7 @@
port@2 {
reg = <2>;
label = "eth_fc_1000_2";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff1>;
};
@@ -194,7 +194,7 @@
port@3 {
reg = <3>;
label = "eth_fc_1000_3";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff2>;
};
@@ -202,7 +202,7 @@
port@4 {
reg = <4>;
label = "eth_fc_1000_4";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff3>;
};
@@ -210,7 +210,7 @@
port@5 {
reg = <5>;
label = "eth_fc_1000_5";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff4>;
};
@@ -218,7 +218,7 @@
port@6 {
reg = <6>;
label = "eth_fc_1000_6";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff5>;
};
@@ -226,7 +226,7 @@
port@7 {
reg = <7>;
label = "eth_fc_1000_7";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff6>;
};
@@ -234,7 +234,7 @@
port@9 {
reg = <9>;
label = "eth_fc_1000_1";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff0>;
};
@@ -269,7 +269,7 @@
port@2 {
reg = <2>;
label = "eth_fc_1000_8";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff7>;
};
@@ -277,7 +277,7 @@
port@3 {
reg = <3>;
label = "eth_fc_1000_9";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff8>;
};
@@ -285,7 +285,7 @@
port@4 {
reg = <4>;
label = "eth_fc_1000_10";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff9>;
};
--
2.21.3
