Given the fact that we are adding more and more plat_data bool values,
it would make sense to use a u32 flags register and add the appropriate
macro definitions to set and check for a flag present.
No functional change.
Cc: Yong Wu <yong.wu@xxxxxxxxxxxx>
Suggested-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
Signed-off-by: Chao Hao <chao.hao@xxxxxxxxxxxx>
Reviewed-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
---
drivers/iommu/mtk_iommu.c | 28 +++++++++++++++++-----------
drivers/iommu/mtk_iommu.h | 7 +------
2 files changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 88d3df5b91c2..40ca564d97af 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -100,6 +100,15 @@
#define MTK_M4U_TO_LARB(id) (((id) >> 5) & 0xf)
#define MTK_M4U_TO_PORT(id) ((id) & 0x1f)
+#define HAS_4GB_MODE BIT(0)
+/* HW will use the EMI clock if there isn't the "bclk". */
+#define HAS_BCLK BIT(1)
+#define HAS_VLD_PA_RNG BIT(2)
+#define RESET_AXI BIT(3)
+
+#define MTK_IOMMU_HAS_FLAG(pdata, _x) \
+ ((((pdata)->flags) & (_x)) == (_x))
+
struct mtk_iommu_domain {
struct io_pgtable_cfg cfg;
struct io_pgtable_ops *iop;
@@ -563,7 +572,8 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
upper_32_bits(data->protect_base);
writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR);
- if (data->enable_4GB && data->plat_data->has_vld_pa_rng) {
+ if (data->enable_4GB &&
+ MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_VLD_PA_RNG)) {
/*
* If 4GB mode is enabled, the validate PA range is from
* 0x1_0000_0000 to 0x1_ffff_ffff. here record bit[32:30].
@@ -573,7 +583,7 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
}
writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
- if (data->plat_data->reset_axi) {
+ if (MTK_IOMMU_HAS_FLAG(data->plat_data, RESET_AXI)) {
/* The register is called STANDARD_AXI_MODE in this case */
writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
}
@@ -618,7 +628,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
/* Whether the current dram is over 4GB */
data->enable_4GB = !!(max_pfn > (BIT_ULL(32) >> PAGE_SHIFT));
- if (!data->plat_data->has_4gb_mode)
+ if (!MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_4GB_MODE))
data->enable_4GB = false;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -631,7 +641,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
if (data->irq < 0)
return data->irq;
- if (data->plat_data->has_bclk) {
+ if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_BCLK)) {
data->bclk = devm_clk_get(dev, "bclk");
if (IS_ERR(data->bclk))
return PTR_ERR(data->bclk);
@@ -763,23 +773,19 @@ static const struct dev_pm_ops mtk_iommu_pm_ops = {
static const struct mtk_iommu_plat_data mt2712_data = {
.m4u_plat = M4U_MT2712,
- .has_4gb_mode = true,
- .has_bclk = true,
- .has_vld_pa_rng = true,
+ .flags = HAS_4GB_MODE | HAS_BCLK | HAS_VLD_PA_RNG,
.larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
};
static const struct mtk_iommu_plat_data mt8173_data = {
.m4u_plat = M4U_MT8173,
- .has_4gb_mode = true,
- .has_bclk = true,
- .reset_axi = true,
+ .flags = HAS_4GB_MODE | HAS_BCLK | RESET_AXI,
.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
};
static const struct mtk_iommu_plat_data mt8183_data = {
.m4u_plat = M4U_MT8183,
- .reset_axi = true,
+ .flags = RESET_AXI,
.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
};
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 7212e6fcf982..5225a9170aaa 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -39,12 +39,7 @@ enum mtk_iommu_plat {
struct mtk_iommu_plat_data {
enum mtk_iommu_plat m4u_plat;
- bool has_4gb_mode;
-
- /* HW will use the EMI clock if there isn't the "bclk". */
- bool has_bclk;
- bool has_vld_pa_rng;
- bool reset_axi;
+ u32 flags;
unsigned char larbid_remap[MTK_LARB_NR_MAX];
};
--
2.18.0
