Re: [PATCH 2/2] ARM: dts: Change WDOG_ANY signal from push-pull to open-drain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 28, 2020 at 02:43:43PM +0000, Schrempf Frieder wrote:
> From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> 
> The WDOG_ANY signal is connected to the RESET_IN signal of the SoM
> and baseboard. It is currently configured as push-pull, which means
> that if some external device like a programmer wants to assert the
> RESET_IN signal by pulling it to ground, it drives against the high
> level WDOG_ANY output of the SoC.
> 
> To fix this we set the WDOG_ANY signal to open-drain configuration.
> That way we make sure that the RESET_IN can be asserted by the
> watchdog as well as by external devices.
> 
> Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

Added 'imx6ul-kontron:' to subject and applied both patches.

Shawn



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux