[PATCH 2/2] ARM: dts: Change WDOG_ANY signal from push-pull to open-drain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

The WDOG_ANY signal is connected to the RESET_IN signal of the SoM
and baseboard. It is currently configured as push-pull, which means
that if some external device like a programmer wants to assert the
RESET_IN signal by pulling it to ground, it drives against the high
level WDOG_ANY output of the SoC.

To fix this we set the WDOG_ANY signal to open-drain configuration.
That way we make sure that the RESET_IN can be asserted by the
watchdog as well as by external devices.

Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
---
 arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index fc316408721d..61ba21a605a8 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -116,7 +116,7 @@
 
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x30b0
+			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
 		>;
 	};
 };
-- 
2.17.1



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux