Re: [PATCH v4 7/7] iommu/mediatek: Add mt6779 basic support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2020-06-18 at 18:00 +0200, Matthias Brugger wrote:
> 
> On 18/06/2020 13:54, chao hao wrote:
> > On Wed, 2020-06-17 at 11:33 +0200, Matthias Brugger wrote:
> >>
> >> On 17/06/2020 05:00, Chao Hao wrote:
> >>> 1. Start from mt6779, INVLDT_SEL move to offset=0x2c, so we add
> >>>    REG_MMU_INV_SEL_GEN2 definition and mt6779 uses it.
> >>> 2. Change PROTECT_PA_ALIGN from 128 byte to 256 byte.
> >>> 3. For REG_MMU_CTRL_REG register, we only need to change bit[2:0],
> >>>    others bits keep default value, ex: enable victim tlb.
> >>> 4. Add mt6779_data to support mm_iommu HW init.
> >>>
> >>> Change since v3:
> >>> 1. When setting MMU_CTRL_REG, we don't need to include mt8173.
> >>>
> >>> Cc: Yong Wu <yong.wu@xxxxxxxxxxxx>
> >>> Signed-off-by: Chao Hao <chao.hao@xxxxxxxxxxxx>
> >>> ---
> >>>  drivers/iommu/mtk_iommu.c | 20 ++++++++++++++++++--
> >>>  drivers/iommu/mtk_iommu.h |  1 +
> >>>  2 files changed, 19 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> >>> index c706bca6487e..def2e996683f 100644
> >>> --- a/drivers/iommu/mtk_iommu.c
> >>> +++ b/drivers/iommu/mtk_iommu.c
> >>> @@ -37,6 +37,11 @@
> >>>  #define REG_MMU_INVLD_START_A			0x024
> >>>  #define REG_MMU_INVLD_END_A			0x028
> >>>  
> >>> +/* In latest Coda, MMU_INV_SEL's offset is changed to 0x02c.
> >>> + * So we named offset = 0x02c to "REG_MMU_INV_SEL_GEN2"
> >>> + * and offset = 0x038 to "REG_MMU_INV_SEL_GEN1".
> >>> + */
> >>
> >> Please delete the comment, this should be understandable from the git history
> > 
> > ok, thanks
> > 
> >>
> >>> +#define REG_MMU_INV_SEL_GEN2			0x02c
> >>>  #define REG_MMU_INV_SEL_GEN1			0x038
> >>>  #define F_INVLD_EN0				BIT(0)
> >>>  #define F_INVLD_EN1				BIT(1)
> >>> @@ -98,7 +103,7 @@
> >>>  #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
> >>>  #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
> >>>  
> >>> -#define MTK_PROTECT_PA_ALIGN			128
> >>> +#define MTK_PROTECT_PA_ALIGN			256
> >>
> >> Do we need 512 bytes for all gen2 IOMMUs?
> >> I'm not sure if we should add this in plat_data or if we should just bump up the
> >> value for all SoCs.
> >> In both cases this should be a separate patch.
> >>
> > From mt6779, MTK_PROTECT_PA_ALIGN is extend to 256 bytes and don't be
> > changed for a long time from our HW designer comment. The legacy iommu
> > also can use it, mabye it doesn't set it by platform.
> > 
> 
> Ok then just bump it to 256 in a new patch. Thanks for clarification.

  Ok, thanks

> > 
> >>>  
> >>>  /*
> >>>   * Get the local arbiter ID and the portid within the larb arbiter
> >>> @@ -543,11 +548,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
> >>>  		return ret;
> >>>  	}
> >>>  
> >>> +	regval = readl_relaxed(data->base + REG_MMU_CTRL_REG);
> >>>  	if (data->plat_data->m4u_plat == M4U_MT8173)
> >>>  		regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
> >>>  			 F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
> >>>  	else
> >>> -		regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR;
> >>> +		regval |= F_MMU_TF_PROT_TO_PROGRAM_ADDR;
> >>
> >> Why do we change this, is it that the bootloader for mt6779 set some values in
> >> the register we have to keep? In this case I think we should update the regval
> >> accordingly.
> > 
> > For REG_MMU_CTRL_REG, bit[12] represents victim_tlb_en feature and
> > victim_tlb is enable defaultly(bit[12]=1),but if we use "regval =
> > F_MMU_TF_PROT_TO_PROGRAM_ADDR", victim_tlb will disable, it will drop
> > iommu performace for mt6779
> > 
> 
> Got it. Please put that in a separate patch then.
> 
  Ok, thanks

> Regards,
> Matthias
> 
> > 
> >>
> >>>  	writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
> >>>  
> >>>  	regval = F_L2_MULIT_HIT_EN |
> >>> @@ -797,6 +803,15 @@ static const struct mtk_iommu_plat_data mt2712_data = {
> >>>  	.larbid_remap   = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
> >>>  };
> >>>  
> >>> +static const struct mtk_iommu_plat_data mt6779_data = {
> >>> +	.m4u_plat      = M4U_MT6779,
> >>> +	.has_sub_comm  = true,
> >>> +	.has_wr_len    = true,
> >>> +	.has_misc_ctrl = true,
> >>> +	.inv_sel_reg   = REG_MMU_INV_SEL_GEN2,
> >>> +	.larbid_remap  = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
> >>> +};
> >>> +
> >>>  static const struct mtk_iommu_plat_data mt8173_data = {
> >>>  	.m4u_plat     = M4U_MT8173,
> >>>  	.has_4gb_mode = true,
> >>> @@ -815,6 +830,7 @@ static const struct mtk_iommu_plat_data mt8183_data = {
> >>>  
> >>>  static const struct of_device_id mtk_iommu_of_ids[] = {
> >>>  	{ .compatible = "mediatek,mt2712-m4u", .data = &mt2712_data},
> >>> +	{ .compatible = "mediatek,mt6779-m4u", .data = &mt6779_data},
> >>>  	{ .compatible = "mediatek,mt8173-m4u", .data = &mt8173_data},
> >>>  	{ .compatible = "mediatek,mt8183-m4u", .data = &mt8183_data},
> >>>  	{}
> >>> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> >>> index 9971cedd72ea..fb79e710c8d9 100644
> >>> --- a/drivers/iommu/mtk_iommu.h
> >>> +++ b/drivers/iommu/mtk_iommu.h
> >>> @@ -31,6 +31,7 @@ struct mtk_iommu_suspend_reg {
> >>>  enum mtk_iommu_plat {
> >>>  	M4U_MT2701,
> >>>  	M4U_MT2712,
> >>> +	M4U_MT6779,
> >>>  	M4U_MT8173,
> >>>  	M4U_MT8183,
> >>>  };
> >>>
> > 





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux