On Wed, Jun 17, 2020 at 11:47 PM Luca Ceresoli <luca@xxxxxxxxxxxxxxxx> wrote: > > Hi Rob, Moritz, > > On 18/06/20 00:39, Rob Herring wrote: > > On Thu, Jun 11, 2020 at 11:11:43PM +0200, Luca Ceresoli wrote: > >> The INIT_B is used by the 6 and 7 series to report the programming status, > >> providing more control and information about programming errors. > >> > >> Signed-off-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx> > >> --- > >> .../devicetree/bindings/fpga/xilinx-slave-serial.txt | 7 ++++++- > >> 1 file changed, 6 insertions(+), 1 deletion(-) > >> > >> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt > >> index 9f103f3872e8..a049082e1513 100644 > >> --- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt > >> +++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt > >> @@ -16,6 +16,10 @@ Required properties: > >> - prog_b-gpios: config pin (referred to as PROGRAM_B in the manual) > >> - done-gpios: config status pin (referred to as DONE in the manual) > >> > >> +Optional properties: > >> +- init_b-gpios: initialization status and configuration error pin > >> + (referred to as INIT_B in the manual) > > > > Don't use '_' in property names: > > > > init-b-gpios > > OK, will fix. > > Moritz, please don't apply this version of patches 4 and 5 if you still > haven't done so. > > Now what about the existing prog_b-gpios property? Should we just leave > it as is for backward compatibility, or is there a migration path to fix > it as well? Just leave it. Rob
