Hi Rob, Moritz, On 18/06/20 00:39, Rob Herring wrote: > On Thu, Jun 11, 2020 at 11:11:43PM +0200, Luca Ceresoli wrote: >> The INIT_B is used by the 6 and 7 series to report the programming status, >> providing more control and information about programming errors. >> >> Signed-off-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx> >> --- >> .../devicetree/bindings/fpga/xilinx-slave-serial.txt | 7 ++++++- >> 1 file changed, 6 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt >> index 9f103f3872e8..a049082e1513 100644 >> --- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt >> +++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt >> @@ -16,6 +16,10 @@ Required properties: >> - prog_b-gpios: config pin (referred to as PROGRAM_B in the manual) >> - done-gpios: config status pin (referred to as DONE in the manual) >> >> +Optional properties: >> +- init_b-gpios: initialization status and configuration error pin >> + (referred to as INIT_B in the manual) > > Don't use '_' in property names: > > init-b-gpios OK, will fix. Moritz, please don't apply this version of patches 4 and 5 if you still haven't done so. Now what about the existing prog_b-gpios property? Should we just leave it as is for backward compatibility, or is there a migration path to fix it as well? Thanks. -- Luca
