This patchset adds improvements to the existing media driver for IMX290 CMOS sensor from Sony. The major changes are adding 2 lane support, configurable link frequency & pixel rate, test pattern generation, and RAW12 mode support. The link frequency & pixel rate combinations depend on various factors like lane count, resolution and image format as per the datasheet. Also fixes for the following issues in the existing driver are included: * the current_format field in the struct imx290 can be used before initialization, * the reset signal to IMX290 isn't handled correctly, * the bus_type field of v4l2_fwnode_endpoint structure passed as the argument to v4l2_fwnode_endpoint_alloc_parse() function is not initiaized. Changes in v5: * Fixed the "Possible unwrapped commit description" issues reported by checkpatch.pl. The "msleep < 20ms can sleep for up to 20ms" warnings are still here, as sleeping for 20ms when the imx290 driver calls msleep(10) is fine Changes in v4: * The review comments from Sakari and Dave are addressed https://lkml.org/lkml/2020/5/24/294 In particular, . HMAX values are included into struct imx290_mode. As the consequence, imx290_modes[] table splitted in two (one for 2-lane configuration, and another for the 4-lane one) . link frequency indexes are kept in struct imx290_mode to avoid using the width field as the key for modes table by imx290_get_link_freq_index(). These are still indexes, not the frequencies themselves: we need a separate tables of the frequencies for the V4L2_CID_LINK_FREQ integer menu control anyway, so the link frequency values should be better kept there (in one place) . imx290_modes_[ptr,num]() and imx290_link_freqs_[ptr,num]() helpers introduced to get rid of repeating lane configuration checks in the code . do_div() is used in imx290_calc_pixel_rate() to fix the build error on 32-bit systems . the check for the link frequencies listed in the device tree is reworked to handle multiple frequencies (vs removing the check entirely in v3) . imx290_enum_frame_size() is not changed since v3: all (of the 2) modes are supported for all the media codes. So the available modes / frame sizes have no dependency on the media code. The fse->code check in imx290_enum_frame_size() just guards against the codes not supported by the driver at all * removed calling imx290_set_data_lanes() from imx290_probe(): the probe() calls imx290_power_on() a bit earlier, and imx290_power_on() sets the number of data lanes * FREQ_INDEX_1080P/FREQ_INDEX_720P #define's introduced to make using imx290_link_freq_* tables a bit more error-proof * the values in the imx290_link_freq_*[] tables are devided by 2: the previous ones were equal to the data rates which are twice as the link frequency Changes in v3: * The review comments from Sakari are addressed https://lkml.org/lkml/2019/12/19/705 As a part of those changes: . null ptr checks are added to imx290_set_fmt() so that it can be called early in the probe() function to set the default format, and to initialize imx290->current_mode and imx290->bpp - these last two must be set before imx290_calc_pixel_rate() is called when creating the controls . setting imx290->bpp removed from imx290_write_current_format(). Now this function only writes to the camera sensor registers. The call to imx290_write_current_format() is moved from imx290_set_fmt() back to imx290_start_streaming(): imx290_set_fmt() can be called when the sensor is powered off, and writes to the sensor registers would fail. . in imx290_set_ctrl() in the 12 bpp case the value the BLKLEVEL register is restored to when the test pattern is disabled is made consistent with imx290_12bit_settings[] * The "IMX290 sensor driver fixes" patchset included https://patchwork.kernel.org/cover/11407347/ * Added a patch to set the bus_type field of v4l2_fwnode_endpoint structure before calling v4l2_fwnode_endpoint_alloc_parse() Andrey Konovalov (4): media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called media: i2c: imx290: fix the order of the args in SET_RUNTIME_PM_OPS() media: i2c: imx290: fix reset GPIO pin handling media: i2c: imx290: set bus_type before calling v4l2_fwnode_endpoint_alloc_parse() Manivannan Sadhasivam (6): media: i2c: imx290: Add support for 2 data lanes media: i2c: imx290: Add configurable link frequency and pixel rate media: i2c: imx290: Add support for test pattern generation media: i2c: imx290: Add RAW12 mode support media: i2c: imx290: Add support to enumerate all frame sizes media: i2c: imx290: Move the settle time delay out of loop drivers/media/i2c/imx290.c | 404 +++++++++++++++++++++++++++++++------ 1 file changed, 343 insertions(+), 61 deletions(-) -- 2.17.1
