Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: mike.looijmans@xxxxxxxxxxxxxxxxx
W: www.topicproducts.com
Please consider the environment before printing this e-mail
On 10-06-2020 22:22, Rob Herring wrote:
On Wed, Jun 03, 2020 at 02:09:15PM +0200, Mike Looijmans wrote:
Support VBUS power control using regulator framework. Enables the regulator
while the port is in host mode.
Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
---
v2: Add missing devm_regulator_get call which got lost during rebase
.../devicetree/bindings/usb/dwc3.txt | 1 +
drivers/usb/dwc3/core.c | 34 ++++++++++++++-----
drivers/usb/dwc3/core.h | 4 +++
drivers/usb/dwc3/drd.c | 6 ++--
4 files changed, 33 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 9946ff9ba735..56bc3f238e2d 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -37,6 +37,7 @@ Optional properties:
- phys: from the *Generic PHY* bindings
- phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy"
or "usb3-phy".
+ - vbus-supply: Regulator handle that provides the VBUS power.
Does the DWC3 block require Vbus to power itself? Doubtful. This
belongs in a usb-connector node. If the DWC3 driver wants to get the
Vbus supply, it can fetch it from that node.
Rob
Ah, now I understand. There's a vbus-supply in the connector in newer
kernel versions than the one I have to test with. It'll have to wait
until I've been able to upgrade the kernel version for this board.
--
Mike Looijmans
