Re: [RFC PATCH 1/2] dt-bindings: tas2562: Add firmware support for tas2563

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mark

On 6/9/20 12:31 PM, Mark Brown wrote:
On Tue, Jun 09, 2020 at 12:28:40PM -0500, Dan Murphy wrote:
Add a property called firmware-name that will be the name of the
firmware that will reside in the file system or built into the kernel.
Why not just use a standard name for the firmware?  If the firmwares
vary per-board then building it using the machine compatible (or DMI
info) could handle that, with a fallback to a standard name for a
default setup.

The number of firmwares can vary per IC on the board itself.  So you may have X number of firmware files all with different names all targets for different TAS2563 ICs.

Also TI will not be providing the individual binaries to the customer.  There is a customer tool that the user uses to create the binaries.

So the output names are arbitrary.

I was going to mention this in the cover letter but did not think mentioning the user tool had any value

Dan




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux