On 23.05.14, 19:39, Matthias Brugger wrote:
2014-05-23 17:12 GMT+02:00 Georgi Djakov <gdjakov@xxxxxxxxxx>:
Add information about the APQ8084 debug UART physical and virtual
addresses in the DEBUG_QCOM_UARTDM Kconfig help section.
Requires: https://lkml.org/lkml/2014/4/14/312
Signed-off-by: Georgi Djakov <gdjakov@xxxxxxxxxx>
---
arch/arm/Kconfig.debug | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 40ee328..e71723d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -376,6 +376,7 @@ choice
their output to the serial port on Qualcomm devices.
ARCH DEBUG_UART_PHYS DEBUG_UART_BASE
+ APQ8084 0xf995e000 0xfa75e000
MSM8X60 0x19c40000 0xf0040000
MSM8960 0x16440000 0xf0040000
MSM8974 0xf991e000 0xfa71e000
You don't have any uart defined in your dts. You should add them
before any adding low level debug support.
Otherwise there might be problems in booting a multi-platform kernel.
Thanks for the comment! As the uart depends on clocks, i am adding it to
the dts as part of my global clock controller patchset [1].
In this patch i am just adding some information to the help section.
Do you see any problem with this?
[1] https://lkml.org/lkml/2014/5/22/422
Thanks,
Georgi
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html