2014-05-23 17:12 GMT+02:00 Georgi Djakov <gdjakov@xxxxxxxxxx>: > Add information about the APQ8084 debug UART physical and virtual > addresses in the DEBUG_QCOM_UARTDM Kconfig help section. > Requires: https://lkml.org/lkml/2014/4/14/312 > > Signed-off-by: Georgi Djakov <gdjakov@xxxxxxxxxx> > --- > arch/arm/Kconfig.debug | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug > index 40ee328..e71723d 100644 > --- a/arch/arm/Kconfig.debug > +++ b/arch/arm/Kconfig.debug > @@ -376,6 +376,7 @@ choice > their output to the serial port on Qualcomm devices. > > ARCH DEBUG_UART_PHYS DEBUG_UART_BASE > + APQ8084 0xf995e000 0xfa75e000 > MSM8X60 0x19c40000 0xf0040000 > MSM8960 0x16440000 0xf0040000 > MSM8974 0xf991e000 0xfa71e000 You don't have any uart defined in your dts. You should add them before any adding low level debug support. Otherwise there might be problems in booting a multi-platform kernel. Regards, Matthias > -- > 1.7.9.5 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- motzblog.wordpress.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html