On Wed, 03 Jun 2020, Luca Ceresoli wrote:
> Add the LP87524-Q1 to the lp87565 bindings document along with an example.
Keep the way to describe model numbers consistent.
I suggest LP87565 here (even though the filename is in lower case).
> Signed-off-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/mfd/lp87565.txt | 47 ++++++++++++++++++-
This is an MFD patch.
Please change the patch subject to reflect that.
> 1 file changed, 46 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/lp87565.txt b/Documentation/devicetree/bindings/mfd/lp87565.txt
> index b75ae23a1ef3..839eac6b75c2 100644
> --- a/Documentation/devicetree/bindings/mfd/lp87565.txt
> +++ b/Documentation/devicetree/bindings/mfd/lp87565.txt
> @@ -1,7 +1,8 @@
> TI LP87565 PMIC MFD driver
>
> Required properties:
> - - compatible: one of "ti,lp87565", "ti,lp87565-q1", "ti,lp87561-q1"
> + - compatible: one of "ti,lp87565", "ti,lp87565-q1", "ti,lp87561-q1",
> + "ti,lp87524-q1"
Maybe have 2 per line. It would really help with my OCD!
> - reg: I2C slave address.
> - gpio-controller: Marks the device node as a GPIO Controller.
> - #gpio-cells: Should be two. The first cell is the pin number and
> @@ -64,3 +65,47 @@ lp87561_pmic: pmic@62 {
> };
> };
> };
> +
> +Example for the TI LP87524-Q1 PMIC (four 1-phase output configuration):
> +
> +lp87524_pmic: pmic@60 {
> + compatible = "ti,lp87524-q1";
> + reg = <0x60>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + buck0-in-supply = <&vdd_5v0>;
> + buck1-in-supply = <&vdd_5v0>;
> + buck2-in-supply = <&vdd_5v0>;
> + buck3-in-supply = <&vdd_5v0>;
> +
> + regulators {
> + buck0_reg: buck0 {
> + regulator-name = "buck0";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck1_reg: buck1 {
> + regulator-name = "buck1";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + buck2_reg: buck2 {
> + regulator-name = "buck2";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <950000>;
> + regulator-always-on;
> + };
> +
> + buck3_reg: buck3 {
> + regulator-name = "buck3";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> + };
> +};
Patch looks okay, but Rob or Mark must review too.
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
