Hardware Info
-------------
Processor - Broadcom BCM58625 dual-core @ 1.2 GHz
DDR3 RAM - 2GB (4x SK Hynix H5TC4G83CFR)
Flash - 1GB (Micron MT29F8G08ABACA)
Switches - Broadcom BCM58625, 2x Qualcomm Atheros QCA8337
Ports - 12 Ports
Wireless(MX65W) - Broadcom BCM43520KMLG (2X)
Serial Port - 115200 8n1
USB - 1x 2.0
Tested with Kernel 5.4. PCIe is inactive on non-wireless MX65.
Note: The QCA8337 switches are connected to ports 4 and 5 of the BCM58625
SRAB, which need be set to SGMII mode.
Signed-off-by: Matthew Hagan <mnhagan88@xxxxxxxxx>
---
arch/arm/boot/dts/bcm958625-mx65.dts | 15 ++
arch/arm/boot/dts/bcm958625-mx65w.dts | 23 ++
arch/arm/boot/dts/bcm958625-mx65x.dtsi | 321 +++++++++++++++++++++++++
3 files changed, 359 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-mx65.dts
create mode 100644 arch/arm/boot/dts/bcm958625-mx65w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-mx65x.dtsi
diff --git a/arch/arm/boot/dts/bcm958625-mx65.dts b/arch/arm/boot/dts/bcm958625-mx65.dts
new file mode 100644
index 000000000000..af161d268824
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-mx65.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65.
+ *
+ * Copyright (C) 2020 Matthew Hagan <mnhagan88@xxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-mx65x.dtsi"
+
+/ {
+ model = "Cisco Meraki MX65";
+ compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
+};
diff --git a/arch/arm/boot/dts/bcm958625-mx65w.dts b/arch/arm/boot/dts/bcm958625-mx65w.dts
new file mode 100644
index 000000000000..67933ca7b598
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-mx65w.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65W.
+ *
+ * Copyright (C) 2020 Matthew Hagan <mnhagan88@xxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-mx65x.dtsi"
+
+/ {
+ model = "Cisco Meraki MX65W";
+ compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625-mx65x.dtsi b/arch/arm/boot/dts/bcm958625-mx65x.dtsi
new file mode 100644
index 000000000000..f69949be501e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-mx65x.dtsi
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
+ *
+ * Copyright (C) 2020 Matthew Hagan <mnhagan88@xxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-mx6x-common.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ mdio-mux-mmio = &mdiomux0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_orange {
+ label = "power:orange";
+ gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ lan_leds {
+ label = "lan:leds";
+ gpios = <&gpioa 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan1_right {
+ label = "wan1:right";
+ gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+ };
+
+ wan1_left {
+ label = "wan1:left";
+ gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+ };
+
+ wan2_right {
+ label = "wan2:right";
+ gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+ };
+
+ wan2_left {
+ label = "wan2:left";
+ gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+ };
+
+ power_white {
+ label = "power:white";
+ gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-buttons {
+ compatible = "gpio-keys-polled";
+ autorepeat;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ mdio: mdio@18032000 {
+ compatible = "brcm,iproc-mdio";
+ reg = <0x18032000 0x8>;
+ #size-cells = <0>;
+ #address-cells = <1>;
+ };
+
+ mdiomux0: mdio-mux {
+ compatible = "mdio-mux-mmioreg";
+ reg = <0x18032000 0x4>;
+ mux-mask = <0x200>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mdio-parent-bus = <&mdio>;
+
+ mdio_int: mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ };
+ mdio_ext: mdio@200 {
+ reg = <0x200>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ mdio-mii-mux {
+ compatible = "mdio-mux-mmioreg";
+ reg = <0x1803f1c0 0x4>;
+ mux-mask = <0x2000>;
+ mdio-parent-bus = <&mdio_ext>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy_port6: phy@0 {
+ reg = <0>;
+ };
+
+ phy_port7: phy@1 {
+ reg = <1>;
+ };
+
+ phy_port8: phy@2 {
+ reg = <2>;
+ };
+
+ phy_port9: phy@3 {
+ reg = <3>;
+ };
+
+ phy_port10: phy@4 {
+ reg = <4>;
+ };
+
+ switch@10 {
+ compatible = "qca,qca8337";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10>;
+ dsa,member = <1 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&sgmii1>;
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan8";
+ phy-handle = <&phy_port6>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan9";
+ phy-handle = <&phy_port7>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan10";
+ phy-handle = <&phy_port8>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan11";
+ phy-handle = <&phy_port9>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "lan12";
+ phy-handle = <&phy_port10>;
+ };
+ };
+ };
+ };
+
+ mdio-mii@2000 {
+ reg = <0x2000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy_port1: phy@0 {
+ reg = <0>;
+ };
+
+ phy_port2: phy@1 {
+ reg = <1>;
+ };
+
+ phy_port3: phy@2 {
+ reg = <2>;
+ };
+
+ phy_port4: phy@3 {
+ reg = <3>;
+ };
+
+ phy_port5: phy@4 {
+ reg = <4>;
+ };
+
+ switch@10 {
+ compatible = "qca,qca8337";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10>;
+ dsa,member = <2 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&sgmii0>;
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ phy-handle = <&phy_port1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan4";
+ phy-handle = <&phy_port2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan5";
+ phy-handle = <&phy_port3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan6";
+ phy-handle = <&phy_port4>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "lan7";
+ phy-handle = <&phy_port5>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&srab {
+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+ status = "okay";
+ dsa,member = <0 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ label = "wan1";
+ reg = <0>;
+ };
+
+ port@1 {
+ label = "wan2";
+ reg = <1>;
+ };
+
+ sgmii0: port@4 {
+ label = "sw0";
+ reg = <4>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ sgmii1: port@5 {
+ label = "sw1";
+ reg = <5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@8 {
+ ethernet = <&amac2>;
+ label = "cpu";
+ reg = <8>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ mdio_sel: mdio {
+ function = "mdio";
+ groups = "mdio_grp";
+ };
+};
--
2.25.4
