Re: [RFC v1 2/3] drivers: nvmem: Add driver for QTI qfprom-efuse support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 26/05/2020 23:31, Doug Anderson wrote:
Hi,

On Fri, May 22, 2020 at 4:18 AM Srinivas Kandagatla
<srinivas.kandagatla@xxxxxxxxxx> wrote:

On 21/05/2020 22:28, Doug Anderson wrote:
Hi,

On Thu, May 21, 2020 at 8:56 AM Srinivas Kandagatla
<srinivas.kandagatla@xxxxxxxxxx> wrote:

On 21/05/2020 16:10, Doug Anderson wrote:
On 20/05/2020 23:48, Doug Anderson wrote:
Is this only applicable for corrected address space?
I guess I was proposing a two dts-node / two drive approach here.

dts node #1:just covers the memory range for accessing the FEC-corrected data
driver #1: read-only and reads the FEC-corrected data

dts node #2: covers the memory range that's_not_  the FEC-corrected
memory range.
driver #2: read-write.  reading reads uncorrected data

Does that seem sane?
I see your point but it does not make sense to have two node for same thing.
OK, so that sounds as if we want to go with the proposal where we
"deprecate the old driver and/or bindings and say that there really
should just be one node and one driver".

Would this be acceptable to you?

1. Officially mark the old bindings as deprecated.

Possibly Yes for some reasons below!


2. Leave the old driver there to support the old deprecated bindings,
at least until everyone can be transferred over.  There seem to be
quite a few existing users of "qcom,qfprom" and we're supposed to make
an attempt at keeping the old device trees working, at least for a
little while.  Once everyone is transferred over we could decide to
delete the old driver.
we could consider "qcom,qfrom" to be only passing corrected address
space. Till we transition users to new bindings!


Yes.

3. We will have a totally new driver here.
No, we should still be using the same driver. But the exiting driver
seems to incorrect and is need of fixing.

Having a look at the memory map for old SoCs like msm8996 and msm8916
shows that memory map that was passed to qfprom driver is corrected
address space. Writes will not obviously work!

This should also be true with sdm845 or sc7180

That needs to be fixed first!

OK, so to summarize:


1. We will have one driver: "drivers/nvmem/qfprom.c"

Yes, we should one driver for this because we are dealing with exactly
same IP.


2. If the driver detects that its reg is pointing to the corrected
address space then it should operate in read-only mode.  Maybe it can
do this based on the compatible string being just "qcom,qfprom" or
maybe it can do this based on the size of the "reg".

I found out that there is a version register at offset of 0x6000 which
can give MAJOR, MINOR and STEP numbers.

So we could still potentially continue using "qcom,qfprom"

OK, sounds good.  I think it's still good practice to include both the
SoC specific and the generic.  Even if the driver never does anything
with the SoC-specific compatible string it doesn't hurt to have it
there.  Thus, we'd want:

compatible = "qcom,msm8996-qfprom", "qcom,qfprom"

The driver itself would never need to refer to the SoC-specific name
but that does give us more flexibility.


The address space can be split into 3 resources, which is inline with
Specs as well

1. Raw address space ("raw")
2. Configuration address space ("conf" or "core")
3. Corrected address space ("corrected")

Sure, this is OK with me then.  Originally Ravi had 3 ranges but then
he was (in the driver) treating it as one range.  As long as the
driver truly treats it as 3 ranges I have no problem doing it like
this.

In general, over the years, there has been a push to keep
implementation details out of the dts and rely more on the "of_match"
table to add SoC-specific details.  This becomes really important when
1 year down the road you realize that you need one more random
property or address range to fix some bug and then you need to figure
out how to try to keep old "dts" files compatible.  It's not a
hard-and-fast rule, though.

Am not 100% sure if "qcom,fuse-blow-frequency" is something integration specific or SoC Specific, My idea was that this will give more flexibility in future. As adding new SoC Support does not need driver changes.

Having said that, Am okay either way!
Incase we go compatible way, I would like to see compatible strings having proper IP versions to have ip version rather than SoC names.

Having SoC names in compatible string means both driver and bindings need update for every new SoC which can be overhead very soon!

Rob can help review once we have v2 bindings out!



Exiting qfprom entries or read-only qfprom  will have "corrected"
address space which can be the only resource provided by device tree
entries.
Other two entries("raw" and "conf") are optional.

qfprom: qfprom@780000 {
          compatible = "qcom,qfprom";
         reg = <0 0x00780000 0 0x8ff>,
                 <0 0x00782000 0 0x100>,
                 <0 0x00784000 0 0x8ff>;
         reg-names = "raw", "conf", "corrected";

         vcc-supply = <&vreg_xyz>;

         clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
         clock-names = "secclk";

         assigned-clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
          assigned-clock-rates = <19200000>;

         qcom,fuse-blow-frequency = <4800000>

          #address-cells = <1>;
          #size-cells = <1>;

         qusb2p_hstx_trim: hstx-trim-primary@25b {
                 reg = <0x25b 0x1>;
                 bits = <1 3>;
         };
};

Regarding clk rate setting, the default rate can be set using
assigned-clock-rates property, however the blow frequency can go as new
binding.
regarding voltage range for regulator, it should come as part of board
specific voltage regulator node. In worst case we can discuss on adding
new bindings for allowing specific range.

I'd up to you (and Rob H, who probably will wait for the next rev of
the binding before chiming in) but the "qcom,fuse-blow-frequency" is
the type of property that feels better in the driver and achieved from
the of_match table.  Then you don't need to worry about adding it to
the bindings.  Voltage (if needed) would be similar, but I would hope
we don't need it.


for Older SoCs: we still continue to use old style with just one
resource corresponding to corrected by default.

qfprom: qfprom@784000 {
          compatible = "qcom,qfprom";
          reg = <0 0x00784000 0 0x8ff>;
          #address-cells = <1>;
          #size-cells = <1>;

          qusb2p_hstx_trim: hstx-trim-primary@1eb {
                  reg = <0x1eb 0x1>;
                  bits = <1 4>;
          };

          qusb2s_hstx_trim: hstx-trim-secondary@1eb {
                  reg = <0x1eb 0x2>;
                  bits = <6 4>;
          };
};


I see the patch as adding write support to qfprom, rather than adding
new driver or new SoC support.

This in summary should give us good direction for this patch!

Correct me if I miss understood something here!

Sounds sane to me.

Cool! lets see how v2 will endup like!

--srini


-Doug




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux