Re: [Linux-stm32] [PATCH v8 08/10] drm: stm: dw-mipi-dsi: let the bridge handle the HW version check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 29 May 2020, Philippe CORNU <philippe.cornu@xxxxxx> wrote:
Hi Adrian, and thank you very much for the patchset. Thank you also for having tested it on STM32F769 and STM32MP1. Sorry for the late response, Yannick and I will review it as soon as possible and we will keep you posted. Note: Do not hesitate to put us in copy for the next version (philippe.cornu@xxxxxx, yannick.fertre@xxxxxx) Regards, Philippe :-)

Hi Philippe,

Thank you very much for your previous and future STM testing, really appreciate it! I've CC'd Yannick until now but I'll also CC you sure :)

It's been over a month since I posted v8 and I was just gearing up to address all feedback, rebase & retest to prepare v9 but I'll wait a little longer, no problem, it's no rush.

Have an awesome day,
Adrian



On 4/27/20 10:19 AM, Adrian Ratiu wrote:
The stm mipi-dsi platform driver added a version test in
commit fa6251a747b7 ("drm/stm: dsi: check hardware version")
so that HW revisions other than v1.3x get rejected. The rockchip
driver had no such check and just assumed register layouts are
v1.3x compatible.

Having such tests was a good idea because only v130/v131 layouts
were supported at the time, however since adding multiple layout
support in the bridge, the version is automatically checked for
all drivers, compatible layouts get picked and unsupported HW is
automatically rejected by the bridge, so there's no use keeping
the test in the stm driver.

The main reason prompting this change is that the stm driver
test immediately disabled the peripheral clock after reading
the version, making the bridge read version 0x0 immediately
after in its own probe(), so we move the clock disabling after
the bridge does the version test.

Tested on STM32F769 and STM32MP1.

Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Reported-by: Adrian Pop <pop.adrian61@xxxxxxxxx>
Tested-by: Adrian Pop <pop.adrian61@xxxxxxxxx>
Tested-by: Arnaud Ferraris <arnaud.ferraris@xxxxxxxxxxxxx>
Signed-off-by: Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx>
---
New in v6.
---
  drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 12 +++---------
  1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
index 2e1f2664495d0..7218e405d7e2b 100644
--- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -402,15 +402,6 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
  		goto err_dsi_probe;
  	}
- dsi->hw_version = dsi_read(dsi, DSI_VERSION) & VERSION;
-	clk_disable_unprepare(pclk);
-
-	if (dsi->hw_version != HWVER_130 && dsi->hw_version != HWVER_131) {
-		ret = -ENODEV;
-		DRM_ERROR("bad dsi hardware version\n");
-		goto err_dsi_probe;
-	}
-
  	dw_mipi_dsi_stm_plat_data.base = dsi->base;
  	dw_mipi_dsi_stm_plat_data.priv_data = dsi;
@@ -423,6 +414,9 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
  		goto err_dsi_probe;
  	}
+ dsi->hw_version = dsi_read(dsi, DSI_VERSION) & VERSION;
+	clk_disable_unprepare(pclk);
+
  	return 0;
err_dsi_probe:




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux