Re: [PATCH v6 08/11] i2c: designware: Convert driver to using regmap API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, May 30, 2020 at 01:09:30PM +0200, Wolfram Sang wrote:
> On Thu, May 28, 2020 at 12:33:18PM +0300, Serge Semin wrote:
> > Seeing the DW I2C driver is using flags-based accessors with two
> > conditional clauses it would be better to replace them with the regmap
> > API IO methods and to initialize the regmap object with read/write
> > callbacks specific to the controller registers map implementation. This
> > will be also handy for the drivers with non-standard registers mapping
> > (like an embedded into the Baikal-T1 System Controller DW I2C block, which
> > glue-driver is a part of this series).
> > 
> > As before the driver tries to detect the mapping setup at probe stage and
> > creates a regmap object accordingly, which will be used by the rest of the
> > code to correctly access the controller registers. In two places it was
> > appropriate to convert the hand-written read-modify-write and
> > read-poll-loop design patterns to the corresponding regmap API
> > ready-to-use methods.
> > 
> > Note the regmap IO methods return value is checked only at the probe
> > stage. The rest of the code won't do this because basically we have
> > MMIO-based regmap so non of the read/write methods can fail (this also
> > won't be needed for the Baikal-T1-specific I2C controller).
> > 
> > Suggested-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> > Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
> > Tested-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
> > Acked-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
> > Cc: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
> > Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > Cc: linux-mips@xxxxxxxxxxxxxxx
> 
> My codecheckers found these, rightfully I'd say:
> 
> SPARSE
> drivers/i2c/busses/i2c-designware-master.c:427:53: warning: incorrect type in argument 3 (different signedness)
> drivers/i2c/busses/i2c-designware-master.c:427:53:    expected unsigned int *val
> drivers/i2c/busses/i2c-designware-master.c:427:53:    got int *
> 
> CC
> drivers/i2c/busses/i2c-designware-common.c:127: warning: Excess function parameter 'base' description in 'i2c_dw_init_regmap'
> 
> ^ means there is an argument documented which does not exist in the
> function declaration

Well, I fixed these two minor things for your now...

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux