Add optional reset property. Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx> --- v4: rebased to linux-next 20200529 v3: no change v2: actually document the "resets" and "reset-names" optional properties --- Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt index 020e3168ee41..0f21407a7ea3 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt @@ -25,6 +25,9 @@ Optional properties: device. Supported values are 2 or 4 (the default). - dmas : Phandle + identifiers of Tx and Rx DMA channels. - dma-names : Contains the names of the DMA channels. Must be "tx" and "rx". +- resets : contains an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : must contain "spi" Child nodes as per the generic SPI binding. @@ -40,5 +43,7 @@ Example: num-cs = <2>; cs-gpios = <&gpio0 13 0>, <&gpio0 14 0>; + resets = <&rst SPIM0_RST>; + reset-names = "spi"; }; -- 2.17.1
