[PATCH 2/4] ARM: dts: r8a7742: Add thermal device to DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch instantiates the thermal sensor module with thermal-zone
support.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/r8a7742.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index 3ed05c6..f57db05 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -375,6 +375,17 @@
 			resets = <&cpg 407>;
 		};
 
+		thermal: thermal@e61f0000 {
+			compatible = "renesas,thermal-r8a7742",
+				     "renesas,rcar-gen2-thermal";
+			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		icram0: sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
@@ -1359,6 +1370,25 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux