On Wed, May 27, 2020 at 05:47:36PM +0200, Maxime Ripard wrote: > The BCM283x SoCs have a display pipeline composed of several controllers > with device tree bindings that are supported by Linux. > > Now that we have the DT validation in place, let's split into separate > files and convert the device tree bindings for those controllers to > schemas. > > This is just a 1:1 conversion though, and some bindings were incomplete so > it results in example validation warnings that are going to be addressed in > the following patches. > > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> > --- > Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 174 +------------------------------------------------------------------------ > Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml | 66 +++++++++++++++++++++++++++- > Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml | 73 ++++++++++++++++++++++++++++++- > Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml | 75 +++++++++++++++++++++++++++++++- > Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml | 37 +++++++++++++++- > Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml | 40 +++++++++++++++++- > Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml | 37 +++++++++++++++- > Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml | 42 +++++++++++++++++- > Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml | 34 ++++++++++++++- > Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml | 44 ++++++++++++++++++- > MAINTAINERS | 2 +- > 11 files changed, 449 insertions(+), 175 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt > create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml > create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml > create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml > create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml > create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml > create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml > create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml > create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml > create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml > diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml > new file mode 100644 > index 000000000000..3887675f844e > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml > @@ -0,0 +1,73 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/brcm,bcm2835-dsi0.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Broadcom VC4 (VideoCore4) DSI Controller > + > +maintainers: > + - Eric Anholt <eric@xxxxxxxxxx> > + > +properties: > + compatible: > + enum: > + - brcm,bcm2835-dsi0 > + - brcm,bcm2835-dsi1 > + > + reg: > + maxItems: 1 > + > + clocks: > + items: > + - description: The DSI PLL clock feeding the DSI analog PHY > + - description: The DSI ESC clock > + - description: The DSI pixel clock > + > + clock-output-names: true > + # FIXME: The meta-schemas don't seem to allow it for now > + # items: > + # - description: The DSI byte clock for the PHY > + # - description: The DSI DDR2 clock > + # - description: The DSI DDR clock Doesn't pattern work for you? pattern: '^dsi[0-1]_byte$' Either way, Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
