The HDMI block has a block that controls clocks and reset signals to the
HDMI0 and HDMI1 controllers.
Let's expose that through a clock driver implementing a clock and reset
provider.
Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: linux-clk@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
drivers/clk/bcm/Kconfig | 11 +++-
drivers/clk/bcm/Makefile | 1 +-
drivers/clk/bcm/clk-bcm2711-dvp.c | 127 +++++++++++++++++++++++++++++++-
3 files changed, 139 insertions(+)
create mode 100644 drivers/clk/bcm/clk-bcm2711-dvp.c
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index 8c83977a7dc4..784f12c72365 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -1,4 +1,15 @@
# SPDX-License-Identifier: GPL-2.0-only
+
+config CLK_BCM2711_DVP
+ tristate "Broadcom BCM2711 DVP support"
+ depends on ARCH_BCM2835 ||COMPILE_TEST
+ depends on COMMON_CLK
+ default ARCH_BCM2835
+ select RESET_SIMPLE
+ help
+ Enable common clock framework support for the Broadcom BCM2711
+ DVP Controller.
+
config CLK_BCM2835
bool "Broadcom BCM2835 clock support"
depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 0070ddf6cdd2..2c1349062147 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_CLK_BCM2835) += clk-bcm2711-dvp.o
obj-$(CONFIG_CLK_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_CLK_BCM2835) += clk-bcm2835-aux.o
obj-$(CONFIG_CLK_RASPBERRYPI) += clk-raspberrypi.o
diff --git a/drivers/clk/bcm/clk-bcm2711-dvp.c b/drivers/clk/bcm/clk-bcm2711-dvp.c
new file mode 100644
index 000000000000..c1c4b5857d32
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm2711-dvp.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 Cerno
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/reset/reset-simple.h>
+
+#define DVP_HT_RPI_SW_INIT 0x04
+#define DVP_HT_RPI_MISC_CONFIG 0x08
+
+#define NR_CLOCKS 2
+#define NR_RESETS 6
+
+struct clk_dvp {
+ struct clk_hw_onecell_data *data;
+ struct reset_simple_data reset;
+};
+
+static const struct clk_parent_data clk_dvp_parent = {
+ .index = 0,
+};
+
+static int clk_dvp_probe(struct platform_device *pdev)
+{
+ struct clk_hw_onecell_data *data;
+ struct resource *res;
+ struct clk_dvp *dvp;
+ void __iomem *base;
+ int ret;
+
+ dvp = devm_kzalloc(&pdev->dev, sizeof(*dvp), GFP_KERNEL);
+ if (!dvp)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, dvp);
+
+ dvp->data = devm_kzalloc(&pdev->dev,
+ struct_size(dvp->data, hws, NR_CLOCKS),
+ GFP_KERNEL);
+ if (!dvp->data)
+ return -ENOMEM;
+ data = dvp->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ dvp->reset.rcdev.owner = THIS_MODULE;
+ dvp->reset.rcdev.nr_resets = NR_RESETS;
+ dvp->reset.rcdev.ops = &reset_simple_ops;
+ dvp->reset.rcdev.of_node = pdev->dev.of_node;
+ dvp->reset.membase = base + DVP_HT_RPI_SW_INIT;
+ spin_lock_init(&dvp->reset.lock);
+
+ ret = reset_controller_register(&dvp->reset.rcdev);
+ if (ret)
+ return ret;
+
+ data->hws[0] = clk_hw_register_gate_parent_data(&pdev->dev,
+ "hdmi0-108MHz",
+ &clk_dvp_parent, 0,
+ base + DVP_HT_RPI_MISC_CONFIG, 3,
+ CLK_GATE_SET_TO_DISABLE,
+ &dvp->reset.lock);
+ if (IS_ERR(data->hws[0])) {
+ ret = PTR_ERR(data->hws[0]);
+ goto unregister_reset;
+ }
+
+ data->hws[1] = clk_hw_register_gate_parent_data(&pdev->dev,
+ "hdmi1-108MHz",
+ &clk_dvp_parent, 0,
+ base + DVP_HT_RPI_MISC_CONFIG, 4,
+ CLK_GATE_SET_TO_DISABLE,
+ &dvp->reset.lock);
+ if (IS_ERR(data->hws[1])) {
+ ret = PTR_ERR(data->hws[1]);
+ goto unregister_clk0;
+ }
+
+ data->num = NR_CLOCKS;
+ ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
+ data);
+ if (ret)
+ goto unregister_clk1;
+
+ return 0;
+
+unregister_clk1:
+ clk_hw_unregister_gate(data->hws[1]);
+
+unregister_clk0:
+ clk_hw_unregister_gate(data->hws[0]);
+
+unregister_reset:
+ reset_controller_unregister(&dvp->reset.rcdev);
+ return ret;
+};
+
+static int clk_dvp_remove(struct platform_device *pdev)
+{
+ struct clk_dvp *dvp = platform_get_drvdata(pdev);
+ struct clk_hw_onecell_data *data = dvp->data;
+
+ clk_hw_unregister_gate(data->hws[1]);
+ clk_hw_unregister_gate(data->hws[0]);
+ reset_controller_unregister(&dvp->reset.rcdev);
+
+ return 0;
+}
+
+static const struct of_device_id clk_dvp_dt_ids[] = {
+ { .compatible = "brcm,brcm2711-dvp", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver clk_dvp_driver = {
+ .probe = clk_dvp_probe,
+ .remove = clk_dvp_remove,
+ .driver = {
+ .name = "brcm2711-dvp",
+ .of_match_table = clk_dvp_dt_ids,
+ },
+};
+module_platform_driver(clk_dvp_driver);
--
git-series 0.9.1
