RESENDING: I forgot to add Rob/the DT ML in copy while I was expecting
his ack.
As of today, only raw NAND controllers used to feature an integrated
ECC engine and so controller drivers always embedded some code to
enable/disable the correction.
This statement is no longer correct as SPI-NAND devices might not
embed an on-die ECC engine and must make use of an external ECC
engine. We figured there are three possible situations for (generic)
NAND devices: either the engine is 'on-die' (most of the SPI-NANDs, a
few raw NANDs), or the engine is part of the host controller (most raw
NANDs), or the engine may be external (SPI controllers might feature
an hardware ECC engine, otherwise software correction can also be
used).
To solve this situation, this is a proposal on how to make things
work. We want to create an ECC engine object which has simple
callbacks:
* init/cleanup its context
* prepare an I/O operation
* finish an I/O operation
Details about what is going to happen in these callbacks is described
in drivers/mtd/nand/ecc/engine.c.
The logic in this series is:
1/ Use the generic NAND core for all NAND devices (raw and SPI).
2/ Create the ECC engine interface in drivers/mtd/nand/ecc.c
3/ Move code in driver/mtd/nand/ecc.c
4/ Make both software engines (Hamming and BCH) generic, move them in
the ecc/ directory, clean them a bit and instantiate ECC
engines. Write raw NAND helpers to use these two new engines.
5/ Isolate SPI-NAND on-die ECC engine in its own driver.
6/ Make use from the SPI-NAND layer of all the ECC engines listed
above (on user request, people can now make use of soft BCH if they
don't have an ECC-engine).
7/ Extend the logic to hardware external engines. A proposal of a
driver for Macronix external ECC engine will follow in another
series.
This work is now almost ready, the next steps are:
1/ Migrate the raw NAND core to make a proper use of these ECC
engines.
2/ Deprecate in the raw NAND subsystem the interfaces used until now
(I expect we should get rid of a lot of boilerplate).
Thanks,
Miquèl
Changes in v5
=============
* Rebased on top of nand/next
* Avoided a fallthrough situation in commit:
mtd: rawnand: Separate the ECC engine type and the OOB placement
* Fixed an of_dev_put() build issue due to a missing dummy helper.
* Extracted a patch that deserved to be merged quickly.
* Fixed a few issues reported by robots.
Changes in v4
=============
* Rebased on top of a recent kernel version.
* Added Boris' reviewed-by.
* Added Maxime's Acked-by tag.
* Added the missing of_device.h header to ecc.c.
* Corrected a 'minimum' comparison by using min_t.
* Updated the new Macronix raw NAND controller driver by using the new
(ECC related) function names.
* Fixed a function call in ndfc.c.
* Update brcmnand.c file to fit new enumerations and structures (due
to recent Kamal's changes).
* Force sm_ftl to depends on the Hamming engine, because by just
selecting it the ECC code would be embedded in the NAND core and the
NAND core might not be compiled in with sm_ftl.
* Fixed a structure field name that I previously added in davinci
platform data.
* Moved the oob_first placement scheme to Davinci driver. Removed any
occurence of it out of the driver (unused).
* Simplify structure names as proposed by Boris.
* Change enumeration/string names about ECC engine
providers/placements.
* Change the logic in the of_get_nand_ecc_* helpers to ensure backward
compatibility.
* Use enums intead of unsigned integers in the core when referring to
ECC engine type, placement and algorithm.
* Add nand-ecc-placement DT property.
* Deprecate hw_syndrome.
* Deprecate nand-ecc-mode in favor of nand-ecc-provider.
* Fixed a typo in the Macronix ECC driver, where I made a copy/paste
error which I haven't spotted because it is located in a macro only
compiled when building the driver as a module (name of the of_ids
was prefixed marvell_nfc instead of mxic_ecc).
* Simplified the ECC engine API by dropping the useless oobbuf
parameter. Instead, ECC engine drivers are supposed to provide a
spare OOB buffer if none is provided. Updated the three existing
engines.
* Fixed BCH software engine with the help of Mason from Macronix.
* Added a mechanism called "tweaking req" to change the SPI-NAND
requests and ensure they always contain the right amount of data/OOB
needed for the ECC engine to work properly.
Changes in v3
=============
* Added Boris' Reviewed-by tags.
* Added a kernel doc header on the nand_page_io_req enumeration.
* Added support for HW engines.
* Droped the patch clarifying the value of the first entry in
enumerations (which is always 0).
* Rename the nand_ecc_conf structure as nand_ecc_props because the
_conf suffix implies that it is possible to edit it, while in some
cases (eg. on-die ECC) there is nothing to tweak.
* Smoother introduction of the ECC engine abstraction.
* Renamed the ECC engine module nand_ecc_engine.ko.
* Moved all the ECC files into drivers/mtd/nand/. Forgot the ecc/
subdirectory.
* Added a new series to drop the ECC mode enumeration wich mixes the
provider (none, hw, sw, on-die) and the OOB placement (first,
syndrome).
* Various typos fixed.
* Added a few patches to fix bugs found in SPI-NAND/mtdchar.c.
* Introduced the external hardware ECC engine boilerplate.
Changes in v2
=============
* SPDX license identifiers for soft BCH and Hamming: the license macro
was right, "GPL" means "GPLv2 or higher", so do not change this
portion. Also update the commit messages to fit the actual change.
* Do not compile-in the NAND core by default, do it only for raw
NAND. Remove the dependencies on CONFIG_MTD in a different
patch. Also, keep an extra level of hierarchy in Kconfig for the
NAND bits by adding a menu instead of a config.
* Moved the standard OOB layouts in the ecc/engine.c driver instead of
in the NAND core.
* Used the nand_ecc_ prefix in most of the engines functions instead
of just ecc_, which is now reserved for bare helpers. Get rid of the
__ecc prefix.
* In the sunxi NAND controller driver: moved the ECC structure from
sunxi_nfc to sunxi_nand_chip as the ECC engine is per-chip and not
per controller.
* Software Hamming ECC engine is only enabled by default if raw NAND
is also enabled. NDFC now selects the software Hamming ECC engine
(instead of depending on it).
* Mention in software BCH and Hamming Kconfig entries that booting
from NAND is very likely to fail if the user selects these symbols
as modules.
* Added Boris Reviewed-by tag on the SPI-NAND typo fixing patch.
* Renamed the "mode" into a "provider" entry in the ECC configuration
structures.
* Moved the "total" entry of the ECC configuration directly in the
context structure (should probably not be public but let's keep it
as is for now).
* Split the generic ECC engine introduction into smaller patches to do
some renaming aside.
* Drop the "maximize" entry in the ECC engine configuration structure,
keep using a flag like before.
* Canceled the move of the SPI-NAND specific ECC engine out of the
core file.
* Amended the root ECC structures to have three nand_ecc_conf
structures: one for the defaults, one for the chip requirements, one
for the user desires.
* Created a *ondie_engine pointer in the nand_ecc structure to save
the on-die ECC engine, if any. For instance, saving a reference to
this engine is done by the SPI-NAND core.
* Dropped the SPI-NAND flag that was used to distinguish between NAND
flavors from the NAND core, it should not be needed anymore.
* Added an helper in the NAND core to put a reference on an ECC
engine. This will be used by the hardware engines only.
* Renamed the files ecc/sw-{bch,hamming}.c and their headers
include/linux/mtd/nand-ecc-sw-{bch,hamming}-engine.h.
* Created a MTD_NAND_ECC invisible Kconfig symbol.
* Added plenty of missing EXPORT_SYMBOL{,_GPL}().
* Minor modifications so that everything still compiles even when
modules and built-in drivers are mixed in Kconfig in the whole NAND
directory.
Miquel Raynal (21):
mtd: Fix typo in mtd_ooblayout_set_databytes() description
mtd: rawnand: Avoid a typedef
mtd: rawnand: Drop OOB_FIRST placement scheme
dt-bindings: mtd: Deprecate OOB_FIRST mode
mtd: rawnand: Return an enum from of_get_nand_ecc_algo()
mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones
mtd: rawnand: Create a new enumeration to describe OOB placement
mtd: rawnand: Separate the ECC engine type and the OOB placement
mtd: rawnand: Create a new enumeration to describe properly ECC types
mtd: rawnand: Create a helper to retrieve the ECC placement
mtd: rawnand: Use the new ECC engine type enumeration
mtd: rawnand: Deprecate nand-ecc-mode in favor of nand-ecc-provider
mtd: rawnand: Drop the legacy ECC type enumeration
dt-bindings: mtd: Add the nand-ecc-placement property
dt-bindings: mtd: Deprecate hw_syndrome from the ECC modes
dt-bindings: mtd: Deprecate the nand-ecc-mode property
mtd: nand: Move nand_device forward declaration to the top
mtd: nand: Add an extra level in the Kconfig hierarchy
mtd: nand: Drop useless 'depends on' in Kconfig
mtd: nand: Add a NAND page I/O request type
mtd: nand: Rename a core structure
.../devicetree/bindings/mtd/atmel-nand.txt | 3 +-
.../bindings/mtd/nand-controller.yaml | 27 +-
arch/arm/mach-davinci/board-da830-evm.c | 2 +-
arch/arm/mach-davinci/board-da850-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-leopard.c | 3 +-
arch/arm/mach-davinci/board-dm365-evm.c | 2 +-
arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
arch/arm/mach-davinci/board-dm646x-evm.c | 2 +-
arch/arm/mach-davinci/board-mityomapl138.c | 2 +-
arch/arm/mach-davinci/board-neuros-osd2.c | 2 +-
arch/arm/mach-davinci/board-omapl138-hawk.c | 2 +-
arch/arm/mach-s3c24xx/common-smdk.c | 2 +-
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-bast.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-jive.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-qt2410.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 2 +-
arch/arm/mach-s3c24xx/mach-vstms.c | 2 +-
arch/arm/mach-s3c64xx/mach-hmt.c | 2 +-
arch/arm/mach-s3c64xx/mach-mini6410.c | 2 +-
arch/arm/mach-s3c64xx/mach-real6410.c | 2 +-
drivers/mtd/mtdcore.c | 2 +-
drivers/mtd/nand/Kconfig | 5 +
drivers/mtd/nand/onenand/Kconfig | 1 -
drivers/mtd/nand/raw/Kconfig | 1 -
drivers/mtd/nand/raw/ams-delta.c | 2 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 14 +-
drivers/mtd/nand/raw/au1550nd.c | 2 +-
.../mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c | 3 +-
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 8 +-
.../mtd/nand/raw/cadence-nand-controller.c | 4 +-
drivers/mtd/nand/raw/cafe_nand.c | 3 +-
drivers/mtd/nand/raw/cs553x_nand.c | 2 +-
drivers/mtd/nand/raw/davinci_nand.c | 153 +++++---
drivers/mtd/nand/raw/denali.c | 3 +-
drivers/mtd/nand/raw/diskonchip.c | 3 +-
drivers/mtd/nand/raw/fsl_elbc_nand.c | 18 +-
drivers/mtd/nand/raw/fsl_ifc_nand.c | 10 +-
drivers/mtd/nand/raw/fsl_upm.c | 2 +-
drivers/mtd/nand/raw/fsmc_nand.c | 12 +-
drivers/mtd/nand/raw/gpio.c | 2 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/nand/raw/hisi504_nand.c | 6 +-
.../mtd/nand/raw/ingenic/ingenic_nand_drv.c | 14 +-
drivers/mtd/nand/raw/lpc32xx_mlc.c | 2 +-
drivers/mtd/nand/raw/lpc32xx_slc.c | 3 +-
drivers/mtd/nand/raw/marvell_nand.c | 17 +-
drivers/mtd/nand/raw/meson_nand.c | 2 +-
drivers/mtd/nand/raw/mpc5121_nfc.c | 2 +-
drivers/mtd/nand/raw/mtk_nand.c | 6 +-
drivers/mtd/nand/raw/mxc_nand.c | 23 +-
drivers/mtd/nand/raw/nand_base.c | 336 ++++++++----------
drivers/mtd/nand/raw/nand_micron.c | 4 +-
drivers/mtd/nand/raw/nand_toshiba.c | 3 +-
drivers/mtd/nand/raw/nandsim.c | 4 +-
drivers/mtd/nand/raw/ndfc.c | 2 +-
drivers/mtd/nand/raw/omap2.c | 20 +-
drivers/mtd/nand/raw/orion_nand.c | 2 +-
drivers/mtd/nand/raw/pasemi_nand.c | 2 +-
drivers/mtd/nand/raw/plat_nand.c | 2 +-
drivers/mtd/nand/raw/qcom_nandc.c | 2 +-
drivers/mtd/nand/raw/r852.c | 3 +-
drivers/mtd/nand/raw/s3c2410.c | 16 +-
drivers/mtd/nand/raw/sh_flctl.c | 4 +-
drivers/mtd/nand/raw/sharpsl.c | 2 +-
drivers/mtd/nand/raw/socrates_nand.c | 3 +-
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 9 +-
drivers/mtd/nand/raw/sunxi_nand.c | 18 +-
drivers/mtd/nand/raw/tango_nand.c | 2 +-
drivers/mtd/nand/raw/tegra_nand.c | 2 +-
drivers/mtd/nand/raw/tmio_nand.c | 2 +-
drivers/mtd/nand/raw/txx9ndfmc.c | 2 +-
drivers/mtd/nand/raw/vf610_nfc.c | 4 +-
drivers/mtd/nand/raw/xway_nand.c | 2 +-
drivers/mtd/nand/spi/core.c | 4 +-
include/linux/mtd/nand.h | 30 +-
include/linux/mtd/rawnand.h | 46 ++-
include/linux/mtd/spinand.h | 2 +-
include/linux/platform_data/mtd-davinci.h | 9 +-
.../linux/platform_data/mtd-nand-s3c2410.h | 2 +-
86 files changed, 528 insertions(+), 419 deletions(-)
--
2.20.1
