Other dts have nodes sorted by physical address, be consistent with that.
Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 176 +++++++++++++--------------
1 file changed, 88 insertions(+), 88 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index a273b99bf1e6..bc8a14df60e5 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -379,6 +379,12 @@ ufs_mem_phy_lanes: lanes@1d87400 {
};
};
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x0 0x01f40000 0x0 0x40000>;
+ #hwlock-cells = <1>;
+ };
+
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sm8250-usb-hs-phy",
"qcom,usb-snps-hs-7nm-phy";
@@ -559,15 +565,6 @@ usb_2_dwc3: dwc3@a800000 {
};
};
- intc: interrupt-controller@17a00000 {
- compatible = "arm,gic-v3";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
- <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
- };
-
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm8250-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -596,85 +593,6 @@ spmi_bus: qcom,spmi@c440000 {
#interrupt-cells = <4>;
};
- apps_rsc: rsc@18200000 {
- label = "apps_rsc";
- compatible = "qcom,rpmh-rsc";
- reg = <0x0 0x18200000 0x0 0x10000>,
- <0x0 0x18210000 0x0 0x10000>,
- <0x0 0x18220000 0x0 0x10000>;
- reg-names = "drv-0", "drv-1", "drv-2";
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- qcom,tcs-offset = <0xd00>;
- qcom,drv-id = <2>;
- qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
- <WAKE_TCS 3>, <CONTROL_TCS 1>;
-
- rpmhcc: clock-controller {
- compatible = "qcom,sm8250-rpmh-clk";
- #clock-cells = <1>;
- clock-names = "xo";
- clocks = <&xo_board>;
- };
-
- rpmhpd: power-controller {
- compatible = "qcom,sm8250-rpmhpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmhpd_opp_table>;
-
- rpmhpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmhpd_opp_ret: opp1 {
- opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
- };
-
- rpmhpd_opp_min_svs: opp2 {
- opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
- };
-
- rpmhpd_opp_low_svs: opp3 {
- opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
- };
-
- rpmhpd_opp_svs: opp4 {
- opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
- };
-
- rpmhpd_opp_svs_l1: opp5 {
- opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
- };
-
- rpmhpd_opp_nom: opp6 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
- };
-
- rpmhpd_opp_nom_l1: opp7 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
- };
-
- rpmhpd_opp_nom_l2: opp8 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
- };
-
- rpmhpd_opp_turbo: opp9 {
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
- };
-
- rpmhpd_opp_turbo_l1: opp10 {
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
- };
- };
- };
- };
-
- tcsr_mutex: hwlock@1f40000 {
- compatible = "qcom,tcsr-mutex";
- reg = <0x0 0x01f40000 0x0 0x40000>;
- #hwlock-cells = <1>;
- };
-
tlmm: pinctrl@f100000 {
compatible = "qcom,sm8250-pinctrl";
reg = <0 0x0f100000 0 0x300000>,
@@ -690,6 +608,15 @@ tlmm: pinctrl@f100000 {
wakeup-parent = <&pdc>;
};
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
+ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
timer@17c20000 {
#address-cells = <2>;
#size-cells = <2>;
@@ -749,6 +676,79 @@ frame@17c2d000 {
};
};
+ apps_rsc: rsc@18200000 {
+ label = "apps_rsc";
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x0 0x18200000 0x0 0x10000>,
+ <0x0 0x18210000 0x0 0x10000>,
+ <0x0 0x18220000 0x0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
+ <WAKE_TCS 3>, <CONTROL_TCS 1>;
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sm8250-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board>;
+ };
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sm8250-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+ };
+
cpufreq_hw: cpufreq@18591000 {
compatible = "qcom,cpufreq-hw";
reg = <0 0x18591000 0 0x1000>,
--
2.26.1
