On 5/22/20 11:07 AM, Greg KH wrote: > On Thu, May 21, 2020 at 11:11:46AM +0200, Daniel Mack wrote: >> This is v3 of the series. >> >> v3: >> >> * Add my s-o-b to the first two patches >> >> v2: >> >> * Change single bool properties into an array >> (suggested by Rob Herring) >> * Add a patch first try TRIGGER_LOW and SHARED interrupts, and then >> fall back to FALLING edge if the IRQ controller fails to provide the >> former (suggested by Maarten Brock) >> * Add a patch to check for the device presence >> >> Daniel Mack (4): >> sc16is7xx: Always use falling edge IRQ >> sc16is7xx: Use threaded IRQ >> sc16is7xx: Allow sharing the IRQ line >> sc16is7xx: Read the LSR register for basic device presence check >> >> Pascal Huerst (2): >> dt-bindings: sc16is7xx: Add flag to activate IrDA mode >> sc16is7xx: Add flag to activate IrDA mode > > As I have to wait for the DT addition to be reviewed before applying the > first 2 patches here, I've taken the other 4 instead at the moment. If > you could rebase the first two and resend when they get acked, so that I > could apply them, that would be great. Sure, will do. Thanks :) Daniel
