This is v3 of the series. v3: * Add my s-o-b to the first two patches v2: * Change single bool properties into an array (suggested by Rob Herring) * Add a patch first try TRIGGER_LOW and SHARED interrupts, and then fall back to FALLING edge if the IRQ controller fails to provide the former (suggested by Maarten Brock) * Add a patch to check for the device presence Daniel Mack (4): sc16is7xx: Always use falling edge IRQ sc16is7xx: Use threaded IRQ sc16is7xx: Allow sharing the IRQ line sc16is7xx: Read the LSR register for basic device presence check Pascal Huerst (2): dt-bindings: sc16is7xx: Add flag to activate IrDA mode sc16is7xx: Add flag to activate IrDA mode .../bindings/serial/nxp,sc16is7xx.txt | 4 + drivers/tty/serial/sc16is7xx.c | 73 +++++++++++++------ 2 files changed, 56 insertions(+), 21 deletions(-) -- 2.26.2
