This patch set adds i2c controller support
for the Nuvoton NPCM Baseboard Management Controller (BMC).
NPCM7xx includes 16 I2C controllers. This driver operates the controller.
This module also includes a slave mode.
---
v13 -> v12:
- Fix yaml example. Issue found by an updated dt_binding_check.
- remove double spacing. indentation issues.
- remove ifdef DEBUG_FS around __init and __exit.
- debugfs and counters are always present in bus struct.
- Fix npcm_i2c_write_fifo_slave flow.
- Remove version number.
v12 -> v11:
- Fix according to maintainer comments.
- debugfs simplified (usedebugfs_create_u64).
- slave read fifo split from master read fifo.
v11 -> v10:
- Fix according to maintainer comments.
- Init clk simplified.
- Comments in c99
- Split master irq function.
- debugfs not mandatory.
- yaml file fix.
v10 -> v9:
- Fix according to maintainer comments.
- binding file changed to yaml format.
- Shorten recovery flow.
- Add support for health monitoring counters.
v9 -> v8:
- Fix according to maintainer comments.
- Split lines of iowrite..(ioread..) to separate lines.
- Use readx_poll_timeout_atomic
- resolve various style issues.
v8 -> v7:
- Split to two commits, one for master, one for slave.
- Rename smb to i2c.
- Remove global vars.
v7 -> v6:
- Rebased on Linux 5.4-rc8 (was Linux 5.4-rc7).
- Fix issue found by kbuild test robot (redundant include).
- Note: left a warning related to fall through. This fall through is
intentional.
v6 -> v5:
- Update documentation
v5 -> v4:
- support recovery
- master-slave switch support needed for IPMB
v4 -> v3:
- typo on cover letter.
v3 -> v2:
- fix dt binding: compatible name: omit "bus"
v2 -> v1:
- run check patch in strict mode.
- use linux crc.
- define regs in constant offset without base.
- remove debug prints.
- no declarations for local functions.
v1: initial version
Signed-off-by: Tali Perry <tali.perry1@xxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
Tali Perry (3):
dt-bindings: i2c: npcm7xx: add NPCM I2C controller documentation
i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
i2c: npcm7xx: Add support for slave mode for Nuvoton NPCM BMC I2C
controller driver.
.../bindings/i2c/nuvoton,npcm7xx-i2c.yaml | 60 +
drivers/i2c/busses/Kconfig | 9 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-npcm7xx.c | 2411 +++++++++++++++++
4 files changed, 2481 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
create mode 100644 drivers/i2c/busses/i2c-npcm7xx.c
base-commit: b9bbe6ed63b2b9f2c9ee5cbd0f2c946a2723f4ce
--
2.22.0
