Re: [PATCH 3/4] remoteproc: add support for a new 64-bit trace version

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,

On 5/21/20 1:04 PM, Bjorn Andersson wrote:
On Wed 25 Mar 13:47 PDT 2020, Suman Anna wrote:

Introduce a new trace entry resource structure that accommodates
a 64-bit device address to support 64-bit processors. This is to
be used using an overloaded version value of 1 in the upper 32-bits
of the previous resource type field. The new resource still uses
32-bits for the length field (followed by a 32-bit reserved field,
so can be updated in the future), which is a sufficiently large
trace buffer size. A 32-bit padding field also had to be added
to align the device address on a 64-bit boundary, and match the
usage on the firmware side.

The remoteproc debugfs logic also has been adjusted accordingly.

Signed-off-by: Suman Anna <s-anna@xxxxxx>
---
  drivers/remoteproc/remoteproc_core.c    | 40 ++++++++++++++++++++-----
  drivers/remoteproc/remoteproc_debugfs.c | 37 ++++++++++++++++++-----
  include/linux/remoteproc.h              | 26 ++++++++++++++++
  3 files changed, 87 insertions(+), 16 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 53bc37c508c6..b9a097990862 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -609,21 +609,45 @@ void rproc_vdev_release(struct kref *ref)
   *
   * Returns 0 on success, or an appropriate error code otherwise
   */
-static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc,
+static int rproc_handle_trace(struct rproc *rproc, void *rsc,
  			      int offset, int avail, u16 ver)
  {
  	struct rproc_debug_trace *trace;
  	struct device *dev = &rproc->dev;
+	struct fw_rsc_trace *rsc1;
+	struct fw_rsc_trace2 *rsc2;
  	char name[15];
+	size_t rsc_size;
+	u32 reserved;
+	u64 da;
+	u32 len;
+
+	if (!ver) {

This looks like a switch to me, but I also do think this looks rather
crude, if you spin off the tail of this function and call it from a
rproc_handle_trace() and rproc_handle_trace64() I believe this would be
cleaner.

Yeah, ok. Will refactor for this in v2.


+		rsc1 = (struct fw_rsc_trace *)rsc;
+		rsc_size = sizeof(*rsc1);
+		reserved = rsc1->reserved;
+		da = rsc1->da;
+		len = rsc1->len;
+	} else if (ver == 1) {
+		rsc2 = (struct fw_rsc_trace2 *)rsc;
+		rsc_size = sizeof(*rsc2);
+		reserved = rsc2->reserved;
+		da = rsc2->da;
+		len = rsc2->len;
+	} else {
+		dev_err(dev, "unsupported trace rsc version %d\n", ver);

If we use "type" to describe your 64-bit-da-trace then this sanity check
would have been taken care of by the core.

+		return -EINVAL;
+	}
- if (sizeof(*rsc) > avail) {
+	if (rsc_size > avail) {
  		dev_err(dev, "trace rsc is truncated\n");
  		return -EINVAL;
  	}
/* make sure reserved bytes are zeroes */
-	if (rsc->reserved) {
-		dev_err(dev, "trace rsc has non zero reserved bytes\n");
+	if (reserved) {
+		dev_err(dev, "trace rsc has non zero reserved bytes, value = 0x%x\n",
+			reserved);
  		return -EINVAL;
  	}
@@ -632,8 +656,8 @@ static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc,
  		return -ENOMEM;
/* set the trace buffer dma properties */
-	trace->trace_mem.len = rsc->len;
-	trace->trace_mem.da = rsc->da;
+	trace->trace_mem.len = len;
+	trace->trace_mem.da = da;
/* set pointer on rproc device */
  	trace->rproc = rproc;
@@ -652,8 +676,8 @@ static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc,
rproc->num_traces++; - dev_dbg(dev, "%s added: da 0x%x, len 0x%x\n",
-		name, rsc->da, rsc->len);
+	dev_dbg(dev, "%s added: da 0x%llx, len 0x%x\n",
+		name, da, len);
return 0;
  }
diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
index 3560eed7a360..ff43736db45a 100644
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -192,7 +192,8 @@ static int rproc_rsc_table_show(struct seq_file *seq, void *p)
  	struct resource_table *table = rproc->table_ptr;
  	struct fw_rsc_carveout *c;
  	struct fw_rsc_devmem *d;
-	struct fw_rsc_trace *t;
+	struct fw_rsc_trace *t1;
+	struct fw_rsc_trace2 *t2;
  	struct fw_rsc_vdev *v;
  	int i, j;
@@ -205,6 +206,7 @@ static int rproc_rsc_table_show(struct seq_file *seq, void *p)
  		int offset = table->offset[i];
  		struct fw_rsc_hdr *hdr = (void *)table + offset;
  		void *rsc = (void *)hdr + sizeof(*hdr);
+		u16 ver = hdr->st.v;
switch (hdr->st.t) {
  		case RSC_CARVEOUT:
@@ -230,13 +232,32 @@ static int rproc_rsc_table_show(struct seq_file *seq, void *p)
  			seq_printf(seq, "  Name %s\n\n", d->name);
  			break;
  		case RSC_TRACE:
-			t = rsc;
-			seq_printf(seq, "Entry %d is of type %s\n",
-				   i, types[hdr->st.t]);
-			seq_printf(seq, "  Device Address 0x%x\n", t->da);
-			seq_printf(seq, "  Length 0x%x Bytes\n", t->len);
-			seq_printf(seq, "  Reserved (should be zero) [%d]\n", t->reserved);
-			seq_printf(seq, "  Name %s\n\n", t->name);
+			if (ver == 0) {

Again, this is a switch, here in a switch. Just defining a new
RSC_TRACE64 type would reduce the amount of code here...

OK.


+				t1 = rsc;
+				seq_printf(seq, "Entry %d is version %d of type %s\n",
+					   i, ver, types[hdr->st.t]);
+				seq_printf(seq, "  Device Address 0x%x\n",
+					   t1->da);
+				seq_printf(seq, "  Length 0x%x Bytes\n",
+					   t1->len);
+				seq_printf(seq, "  Reserved (should be zero) [%d]\n",
+					   t1->reserved);
+				seq_printf(seq, "  Name %s\n\n", t1->name);
+			} else if (ver == 1) {
+				t2 = rsc;
+				seq_printf(seq, "Entry %d is version %d of type %s\n",
+					   i, ver, types[hdr->st.t]);
+				seq_printf(seq, "  Device Address 0x%llx\n",
+					   t2->da);
+				seq_printf(seq, "  Length 0x%x Bytes\n",
+					   t2->len);
+				seq_printf(seq, "  Reserved (should be zero) [%d]\n",
+					   t2->reserved);
+				seq_printf(seq, "  Name %s\n\n", t2->name);
+			} else {
+				seq_printf(seq, "Entry %d is an unsupported version %d of type %s\n",
+					   i, ver, types[hdr->st.t]);
+			}
  			break;
  		case RSC_VDEV:
  			v = rsc;
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 526d3cb45e37..3b3bea42f8b1 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -243,6 +243,32 @@ struct fw_rsc_trace {
  	u8 name[32];
  } __packed;
+/**
+ * struct fw_rsc_trace2 - trace buffer declaration supporting 64-bits
+ * @padding: initial padding after type field for aligned 64-bit access
+ * @da: device address (64-bit)
+ * @len: length (in bytes)
+ * @reserved: reserved (must be zero)
+ * @name: human-readable name of the trace buffer
+ *
+ * This resource entry is an enhanced version of the fw_rsc_trace resourec entry
+ * and the provides equivalent functionality but designed for 64-bit remote
+ * processors.
+ *
+ * @da specifies the device address of the buffer, @len specifies
+ * its size, and @name may contain a human readable name of the trace buffer.
+ *
+ * After booting the remote processor, the trace buffers are exposed to the
+ * user via debugfs entries (called trace0, trace1, etc..).
+ */
+struct fw_rsc_trace2 {

Sounds more like fw_rsc_trace64 to me - in particular since the version
of trace2 is 1...

Yeah, will rename this.


+	u32 padding;
+	u64 da;
+	u32 len;
+	u32 reserved;

What's the purpose of this reserved field?

Partly to make sure the entire resource is aligned on an 8-byte, and partly copied over from fw_rsc_trace entry. I guess 32-bits is already large enough of a size for trace entries irrespective of 32-bit or 64-bit traces, so I doubt if we want to make the len field also a u64.

regards
Suman


Regards,
Bjorn

+	u8 name[32];
+} __packed;
+
  /**
   * struct fw_rsc_vdev_vring - vring descriptor entry
   * @da: device address
--
2.23.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux