A straightforward conversion of the ehci-mv binding to DT schema format
using json-schema.
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
Changes since v1:
- s/GPL-2.0-or-later/GPL-2.0-only/
.../devicetree/bindings/usb/ehci-mv.txt | 23 -------
.../bindings/usb/marvell,pxau2o-ehci.yaml | 60 +++++++++++++++++++
2 files changed, 60 insertions(+), 23 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/usb/ehci-mv.txt
create mode 100644 Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
diff --git a/Documentation/devicetree/bindings/usb/ehci-mv.txt b/Documentation/devicetree/bindings/usb/ehci-mv.txt
deleted file mode 100644
index 335589895763..000000000000
--- a/Documentation/devicetree/bindings/usb/ehci-mv.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Marvell PXA/MMP EHCI controller.
-
-Required properties:
-
-- compatible: must be "marvell,pxau2o-ehci"
-- reg: physical base addresses of the controller and length of memory mapped region
-- interrupts: one EHCI controller interrupt should be described here
-- clocks: phandle list of usb clocks
-- clock-names: should be "USBCLK"
-- phys: phandle for the PHY device
-- phy-names: should be "usb"
-
-Example:
-
- ehci0: usb-ehci@d4208000 {
- compatible = "marvell,pxau2o-ehci";
- reg = <0xd4208000 0x200>;
- interrupts = <44>;
- clocks = <&soc_clocks MMP2_CLK_USB>;
- clock-names = "USBCLK";
- phys = <&usb_otg_phy>;
- phy-names = "usb";
- };
diff --git a/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
new file mode 100644
index 000000000000..eccd8cb45f77
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@xxxxx>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/marvell,pxau2o-ehci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA/MMP EHCI bindings
+
+maintainers:
+ - Lubomir Rintel <lkundrak@xxxxx>
+
+allOf:
+ - $ref: usb-hcd.yaml#
+
+properties:
+ compatible:
+ const: marvell,pxau2o-ehci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: USBCLK
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: usb
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - phys
+ - phy-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/marvell,mmp2.h>
+ usb@d4208000 {
+ compatible = "marvell,pxau2o-ehci";
+ reg = <0xd4208000 0x200>;
+ interrupts = <44>;
+ clocks = <&soc_clocks MMP2_CLK_USB>;
+ clock-names = "USBCLK";
+ phys = <&usb_otg_phy>;
+ phy-names = "usb";
+ };
+
+...
--
2.26.2
