Re: [PATCH V1 1/7] dt-bindings: mmc: Add information for DLL register properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 7 May 2020 at 10:03, Sarthak Garg <sartgarg@xxxxxxxxxxxxxx> wrote:
>
> Add information regarding DLL register properties for getting target
> specific configurations. These DLL register settings may vary from
> target to target.
>
> Also new compatible string value for sm8250 target.

As Rob indicated, it's a bit confusing to understand the bindings. I
think the word "target" is what makes this confusing.

I would suggest splitting this patch into two pieces. One that adds
the new compatible string for the new variant and another patch that
adds the *board specific* dll bindings. That should clarify this.

Kind regards
Uffe

>
> Signed-off-by: Sarthak Garg <sartgarg@xxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> index 5445931..b8e1d2b 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> @@ -17,6 +17,7 @@ Required properties:
>                 "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"
>                 "qcom,msm8992-sdhci", "qcom,sdhci-msm-v4"
>                 "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"
> +               "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"
>                 "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"
>                 "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"
>                 "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
> @@ -46,6 +47,13 @@ Required properties:
>         "cal"   - reference clock for RCLK delay calibration (optional)
>         "sleep" - sleep clock for RCLK delay calibration (optional)
>
> +- qcom,ddr-config: Certain chipsets and platforms require particular settings
> +       for the DDR_CONFIG register. Use this field to specify the register
> +       value as per the Hardware Programming Guide.
> +
> +- qcom,dll-config: Chipset and Platform specific value. Use this field to
> +       specify the DLL_CONFIG register value as per Hardware Programming Guide.
> +
>  Example:
>
>         sdhc_1: sdhci@f9824900 {
> @@ -63,6 +71,9 @@ Example:
>
>                 clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
>                 clock-names = "core", "iface";
> +
> +               qcom,dll-config = <0x000f642c>;
> +               qcom,ddr-config = <0x80040868>;
>         };
>
>         sdhc_2: sdhci@f98a4900 {
> @@ -80,4 +91,7 @@ Example:
>
>                 clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
>                 clock-names = "core", "iface";
> +
> +               qcom,dll-config = <0x0007642c>;
> +               qcom,ddr-config = <0x80040868>;
>         };
> --
> 2.7.4
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux